Switching Voltage:	400VAC - Max
Coil Resistance:	17.5 kOhms
Coil Power:	1.8 VA
Contact Material:	Silver Copper (AgCu3)
Operating Temperature:	-20°C ~ 70°C
Termination Style:	Quick Connect - 0.187" (4.7mm)
Mounting Type:	Chassis Mount
Features:	--
Turn Off Voltage (Min):	35 VAC
Turn On Voltage (Max):	170 VAC
Series:	430 3mm, SCHRACK
Contact Rating (Current):	16A
Contact Form:	SPDT (1 Form C)
Coil Voltage:	230VAC
Coil Current:	13.0mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps: 7-1415430-5 Application Field and Working Principle

Power relays are electrical devices capable of breaking a circuit to interrupt an electrical current flow. A relay typically consists of an electromagnet with a wire coil around it that\'s able to carry a current in order to switch on or off a switch to turn the current to the load on or off. The 7-1415430-5 is a power relay with 2 Amps of current capacity and is used for controlling electrical applications.

Application Field

The 7-1415430-5 power relay can be used in a variety of applications. One application field is in motor control. This relay is suitable for controlling small motors up to 2 Amps current load. It can be used to turn a motor on and off with a single switch. The relay can also be used in industrial automation, where it can be used to control pumps, fans, and other equipment with up to 2 Amps of current. The 7-1415430-5 can also be used in heating, ventilation, and air conditioning (HVAC) systems. It can be used to control blowers, condensers, and other elements in the system. It is also suitable for controlling lighting systems and heating systems. It can be used to control lights and heating elements with up to 2 Amps of current.

Working Principle

The 7-1415430-5 is an electromechanical device. The power relay consists of an electromagnet and a wire coil wrapped around the electromagnet. When an electrical current passes through the coil, the electromagnet is energized and the magnetic force acts on the armature to open or close a switch depending on the orientation of the magnet and the switch. The 7-1415430-5 power relay can be activated by sending a signal from a controller or a microprocessor. The relay can then close or open the switch to turn the current to the load on or off depending on the signal from the controller. Once the signal is received, the relay will close or open the switch.

Conclusion

The 7-1415430-5 power relay has an electrical capacity of 2 Amps and is suitable for controlling motors, pumps, and other equipment. It can also be used in HVAC systems and lighting systems with up to 2 Amps of current. The relay works by passing an electrical current through a coil which energizes an electromagnet, opening or closing the switch. The relay can be activated by a signal from a controller or a microprocessor to turn the current to the load on or off.

The specific data is subject to PDF, and the above content is for reference