700CSP7B60M2QEH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pushbutton switches are a type of electrical switch which, when pushed, activates an electromechanical contact. These switches have been around for many years, and are widely used in the industrial, commercial and residential markets. The 700CSP7B60M2QEH is a typical example of a pushbutton switch that can be used in many different applications. In this article, we will look at the application field and working principle of the 700CSP7B60M2QEH.

The 700CSP7B60M2QEH is a two-pole, two-position momentary pushbutton switch. It is a durable, reliable and cost-effective switch, designed for use in many different capacitor switch applications. This switch has an operating temperature range of -20 degrees C to + 85 degrees C, which makes it suitable for many different environments. The unit has a contact rating of 10A at 125/250VAC, 1,000VAC between contacts and 0.065W at 25 VA. It is UL, CSA, CQC and VDE approved, and meets the requirements of the RoHS directive.

The 700CSP7B60M2QEH is commonly used in many applications due to its versatility. It can be used for various lighting applications such as switching lighting fixtures and ceiling fans, controlling electric motors and for operating ground fault detectors. It is also widely used in HVAC and control applications. Its dust cover and splash-resistant design also make it suitable for use in Zone 2 hazardous locations.

The working principle of the 700CSP7B60M2QEH is fairly straightforward. When the switch is pushed, a spring-loaded plunger contacts two stationary terminals. This creates a closed circuit and activates a signal, allowing current to flow through the switch. When the switch is released, the plunger is reset and the circuit is opened, stopping the signal and interrupting the current. The 700CSP7B60M2QEH has two poles, so when both poles are pressed the signal is continuous.

In conclusion, the 700CSP7B60M2QEH is a versatile, robust and reliable two-pole, two-position momentary pushbutton switch. It is UL, CSA, CQC and VDE approved and is suitable for many different applications, including lighting control, HVAC and control systems and Zone 2 hazardous locations. The working principle is fairly simple; when the switch is pushed, a plunger contacts two terminals and creates a closed circuit, sending a signal and allowing current to flow. When the switch is released, the plunger resets and the circuit is opened, stopping the signal and interrupting the current.

The specific data is subject to PDF, and the above content is for reference