7011X1/7 Optoelectronics

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LED 7011X1/7 indicators are part of discrete LED indicators, which are a type of LED indicating lights found in most vehicles, industrial control panels, appliances, and other electronics to provide a visual indication of the status of the system. LED 7011X1/7 indications are designed for use as a signaling system in industrial applications, but are also applicable for domestic use as a number of designs are available. These are small, rectangular LED lights that provide low power indication with a long life.

Starting with the construction, the 7011X1/7 LEDs are built with plastic encapsulation material for the substrate and silicone for molding. Light sources usually consist of red or green Indium-Gallium-Arsenide (InGaAs) or Infrared (IR) LEDs. The 7011X1/7 indicators are composed of three small LEDs spaced at an angle of 120° in relation to each other. The layout of LEDs should be counterclockwise to unify the viewing angle and the viewing angle should be less than 120°. The common cathode 7011X1/7 indicator requires a voltage of 6 to 12V with a power consumption of 0.03W.

Compared to other LEDs, the 7011X1/7 indications are different and basically require two different sets of external components. To operate the 7011X1/7 with the power supply, a resistor and a capacitor have to be connected to the pins of the LED. This limits the amount of current that flows through the LED, ensuring that the LEDs don’t get damaged due to overloading. In terms of external components, the 7011X1/7 indicators have a resistor, a capacitor, and a diode connected in series, which is important to protect the LED from reverse voltages.

Applications for LED 7011X1/7 indicators include automotive dashboards, medical devices, instrumentation, and industrial control panels. They are also used for indicators for fuel or debit cards in fuel pumps, on/off light indicators, and status indicators on all sorts of machinery. These LEDs can also be used as backlighting for switches, signal boards, dome lights, and pilot lights. LEDs are ideal for these applications since they require less power and consume significantly less energy than incandescent bulbs.

LED 7011X1/7 indicators are ideal for use in a wide range of applications due to their low current requirements, low wattage, and long life. They can be used in applications such as instrumentation, audio equipment, power indicators, and traffic lights. LEDs are known for their energy efficiency and cost-effectiveness, and the 7011X1/7 indicators are no exception. Low power consumption translates into lower cost and longer-lasting indication compared to incandescent bulbs. Additionally, LEDs produce very little heat, so they are safer to use in applications with sensitive equipment.

Overall, the most important fact about LED 7011X1/7 indicators is the working principle behind their operation. They are built from plastic, silicone and light sources, and their layout is counterclockwise to limit the viewing angle. The components connected to the pins of the LED limit the current and protect it from reverse voltages. Low power consumption, cost-effectiveness, and long life make the LED 7011X1/7 indicators a great choice for a variety of applications around the world.

The specific data is subject to PDF, and the above content is for reference