7100.1014.13

Response Time:	Slow
Size / Dimension:	0.453" L x 0.197" W x 0.315" H (11.50mm x 5.00mm x 8.00mm)
Color:	--
Operating Temperature:	-40°C ~ 85°C
Approvals:	cURus
Melting I²t:	1.5
Breaking Capacity @ Rated Voltage:	35A
Mounting Type:	Through Hole
Package / Case:	Radial, Box
Series:	FRT 250T
Voltage Rating - DC:	250V
Voltage Rating - AC:	250V
Current Rating:	800mA
Fuse Type:	Board Mount (Cartridge Style Excluded)
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Fuses

Fuses are electrical components that act as a protective device for electrical circuits. They are designed to break or “blow” circuit connections quickly and reliably and are used in the electrical wiring of appliances, computers, and other equipment. Fuses are intended to be used as a safeguard against overloading of the circuit, protecting it from fires, explosions and other dangers caused by overloaded circuits. It is important to understand the different types of fuses and how they work in order to effectively protect circuits.

7100.1014.13 Application Field and Working Principle

The 7100.1014.13 Fuse is a type of surface-mount fuse with a tiny profile and a long life. These fuses are designed for applications using dc, low current through-hole mounting. The 7100.1014.13 Fuse is intended for use in electrical systems with a current rating up to 10A and a voltage rating of 75V. To ensure a safe and reliable operation, this type of fuse must be adequately sized to the current draw of the devices in the circuit and must be correctly installed, maintained, and tested.

The 7100.1014.13 Fuse has a built-in indicator to show its status. This indicator is connected to the circuit, allowing it to detect the presence of a fault or a current overload. This fuse is designed to open quickly when a fault occurs, protecting the circuit from any further damage. It can also be used as a safety device against overloading or short-circuiting, protecting the circuit in cases of heavy current draw.

The 7100.1014.13 Fuse is constructed with a ceramic body and two metal caps. The body contains a small strip of metal which acts as the fuse element. This strip is connected to both caps, which are then connected to the power source. When the current is too high, it will heat up the fuse element to a certain temperature, and it will then expand to break the connection between the two caps. This shows that the fuse has blown, and the circuit will remain disconnected until the fuse is replaced.

In order for the 7100.1014.13 Fuse to operate as designed, it must have a correctly sized fuse. If the fuse is too small, the current may exceed the fuse rating and create a short circuit. This can lead to catastrophic consequences, such as an electrical fire or an explosion. It is important to make sure that the fuse is correctly sized for the circuit in order to protect it from any potential damage.

Conclusion

The 7100.1014.13 Fuse is a surface-mount fuse designed for applications using dc, low current through-hole mounting. This type of fuse is designed to open quickly when a fault occurs, protecting the circuit from further damage. It is important to make sure that the fuse is correctly sized for the circuit to ensure its safe and reliable operation. By using the correct fuse, you can protect your circuits from overload and other dangers caused by overloaded circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description