7100.1170.95

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are electrical devices designed to provide protection from overloads, current surges, short circuits, and other potential problems resulting from electrical faults. 7100.1170.95 is a type of fuse, and its application field and working principle are discussed in detail below.

Application Field

7100.1170.95 is a fast-acting fuse used primarily as a circuit breaker or a fuse link in low-voltage electrical circuits and can be directly mounted in the electrical equipment. It is widely used in the communication systems, electronic equipment, instruments, medical equipment, testing equipment, and other various AC and DC electrical circuits. It is designed to protect the circuits from overloads, overcurrents, and short circuits, which might cause serious damage to the circuit and related equipment.

Working Principle

The 7100.1170.95 fuse consists of a metallic conductor, a body of non-conductive material, and an element that will melt when the preset current is exceeded. The fuse element is typically made of a material with a low electrical resistance, such as brass, aluminum, or copper, and the fusible element is designed to be significantly weaker than the body of the fuse. When an overload current passes through the fuse, it causes the fuse element to heat up and eventually melt, thus disconnecting the circuit and preventing any further damage.

The 7100.1170.95 fuse is designed with a wide current range to accommodate different applications. The current rating of a 7100.1170.95 fuse is based on the melting point of its fusible element, and the maximum current level that it can carry under normal operating conditions. The fuse is designed to open when the current exceeds the rated current, and the fuse is usually rated to handle a specific value of current. The time it takes for the element to melt varies from a few milliseconds to a few seconds, depending on the current rating of the fuse.

Advantages

The 7100.1170.95 fuse provides protection to the electrical circuit from overloads, overcurrents, and short circuits. It is very effective in providing protection for the devices connected to the electric circuit, thereby preventing damage to the equipment. The 7100.1170.95 fuse also has a relatively low cost, and it is easy to install and maintain. Additionally, it is designed to be able to withstand short-term overloads without melting, which can be an advantage in certain types of applications.

Disadvantages

The 7100.1170.95 fuse is designed to open when the preset current is exceeded, and this can cause a disruption in the operation of the device or circuit. Additionally, the fuse can become damaged if it experiences short-term overloads, and the fuse may not be able to handle high-level current surges. Finally, the 7100.1170.95 fuse is not suitable for use in applications that require fast response time, and it is not a good choice for applications with high levels of energy.

Conclusion

The 7100.1170.95 fuse is a fast-acting fuse used primarily as a circuit breaker in AC and DC electrical circuits. It is designed to provide protection from overloads, current surges, short circuits, and other potential problems resulting from electrical faults. Its advantages include low cost, easy installation and maintenance, and the ability to withstand short-term overloads. However, it can also be a disadvantage in certain applications due to its limited ability to handle current surges and its relatively slow response time.

The specific data is subject to PDF, and the above content is for reference