7123WS 003250

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Multiple Conductor Cables, such as the 7123WS 003250, are an important component in the modern world of electrical connectors. In essence, a multiple conductor cable is a single piece of cable that contains multiple sets of independently insulated wires. A multi-conductor cable has two or more pairs of insulated wires inside the same outer insulation jacket, allowing for a connection between two or more different devices.

Multiple conductor cables come in a variety of different diameters and materials. Generally, the diameter of the cable is determined based on its intended application. For example, power cables have larger diameters than control cables, since power cables typically have a larger capacity to carry heavier currents. These cables are typically made of either copper or aluminum, although other materials are also used, depending on the application.

The 7123WS 003250 is a type of multiple conductor cable, specifically designed for use in hazardous locations. This cable is typically used in locations where there is the potential for the presence of combustible gases, dusts, and fibers. It is designed with two layers of PVC insulation, making it highly resistant to damage from chemicals, heat, and oil. The inner wire strands are wrapped in a special conductor sheath, providing additional protection against vibration and accidental wire separation.

The 7123WS 003250 also features an integral shield to protect against EMI/RFI interference. The shield consists of an outer jacket of aluminum foil, which acts as a Faraday cage, absorbing and blocking any incoming EMI/RFI signals. Additionally, the shield can be connected to ground, further reducing the risk of interference.

The application of multiple conductor cables is varied, but the most common use is in the transmission of power and data signals. For example, multiple conductor cables are often used to provide power to precision motors or electronic systems. Additionally, they can be used to connect equipment, such as computers, to the Internet with an Ethernet cable. These cables can also be used in process control systems, providing the connections needed to transmit control signals.

Similarly, multiple conductor cables are also used to connect electrical devices together. For example, a single cable could be used to connect multiple lights together, or to connect a sound system to its amplifier. Additionally, when dealing with multiple devices using high-voltage power, it is common to use multiple conductor cables to safely connect the devices together, to avoid the risk of electric shock.

The working principle of multiple conductor cables is relatively simple. Each wire in the cable is insulated so that power is only conducted through the intended wire, instead of discharging through any other wire in the cable. This means that data, power, and other signals can travel through the cable at the same time without interfering with each other.

In conclusion, the 7123WS 003250 is a type of multiple conductor cable, typically used in hazardous locations, and designed with multiple layers of insulation and an integral shield for added protection against EMI/RFI interference. Multiple conductor cables are used in a wide variety of applications, including power transmission, data transmission, equipment connection, and process control. The working principle of multiple conductor cables is fairly straightforward; each wire in the cable is insulated, so that power and signals are conducted through the intended wire and not discharged through any other wire in the cable.

The specific data is subject to PDF, and the above content is for reference