71AD30-04-2-AJN

Actuator Type:	Flatted (3.17mm Dia)
Operating Force:	2.880 ~ 23gfm
Panel Cutout Dimensions:	--
Depth Behind Panel:	35.94mm
Features:	--
Termination Style:	Solder Lug
Mounting Type:	Panel Mount
Contact Finish:	--
Contact Material:	Silver Alloy
Angle of Throw:	30°
Actuator Length:	9.53mm
Series:	71
Voltage Rating - DC:	30V
Voltage Rating - AC:	115V
Current Rating:	250mA (AC/DC)
Contact Timing:	Non-Shorting (BBM)
Circuit per Deck:	DP6T
Number of Poles per Deck:	2
Number of Decks:	4
Index Stops:	Adjustable
Number of Positions:	2 ~ 6
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary switches are a type of switching device commonly used to connect two or more sources of electric power. They are typically used to control the flow of electricity from a power source to a load or loads. A rotary switch works by turning either a mechanical knob or a wheel to open and close various “channels” to allow the electricity to flow. The 71AD30-04-2-AJN is a specific type of rotary switch designed for applications that require high voltage and low current switching, such as in medical and industrial electronics. It has 4 positions, with the contacts configured in a 4P2L (4 pole, 2 level) arrangement. The poles and levels can be switched using a mechanical, knob or wheel operated switch.The 71AD30-04-2-AJN rotary switch is most commonly used for applications that require isolation of signal paths with minimal power loss. It is suited for switching higher voltage applications with current levels of up to 5A. The four positions of the switch are connected via two circuits, one for each pole. This arrangement allows the user to maintain two switched signal paths at the same time, providing isolation between two circuits.The 71AD30-04-2-AJN switch has an electrical life of 500 cycles and is capable of switching at a rate of 25 operations per minute. The switch is rated for a dielectric strength of 3000 volts AC and 500 volts DC, and is designed to meet the requirements of varied environmental conditions.The construction of the 71AD30-04-2-AJN rotary switch is designed to reduce mechanical wear and tear, while providing a secure connection between the various components. The switch contacts are made of beryllium copper and the base assembly is designed to accept up to four poles. The AC contacts are standard fused silver and the DC contacts are made of stamped silver. The base of the switch has an epoxy potting compound to provide additional strength and protection.The 71AD30-04-2-AJN switch is rated for operation from –25 degree Celsius to + 85 degree Celsius and is UL and cUL listed. The switch is UL 94V-0 compliant meaning that it meets the flammability requirements for electrical equipment.Due to its construction, size, and variety of applications, the 71AD30-04-2-AJN rotary switch is an excellent choice for applications that require high voltage, low current switching in tight spaces. It is reliable, easy to install, and highly effective for switching applications. With its high contact rating and long operating life, the 71AD30-04-2-AJN rotary switch is an ideal choice for a variety of medical and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description