71EDF30-05-2-AJN

Actuator Type:	Round (4mm Dia)
Operating Force:	2.880 ~ 23gfm
Panel Cutout Dimensions:	--
Depth Behind Panel:	41.48mm
Features:	--
Termination Style:	PC Pin
Mounting Type:	Panel Mount, Through Hole, Right Angle
Contact Finish:	--
Contact Material:	Silver Alloy
Angle of Throw:	30°
Actuator Length:	17.00mm
Series:	71
Voltage Rating - DC:	30V
Voltage Rating - AC:	115V
Current Rating:	250mA (AC/DC)
Contact Timing:	Non-Shorting (BBM)
Circuit per Deck:	DP6T
Number of Poles per Deck:	2
Number of Decks:	5
Index Stops:	Adjustable
Number of Positions:	2 ~ 6
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Rotary switches are mechanical devices typically used with electric current that have several positions or phases of operation. The 71EDF30-05-2-AJN rotary switch is one such device, offering versatility, versatility and reliability.

Application Field

71EDF30-05-2-AJN Rotary Switches are commonly found in industrial automation and control systems, where it is required to control some type of device, machine or process. The first application to come to mind is that of voltage switching, where there is a need to switch between different possible operating levels, such as of low, medium and high voltages. This switch can be used to switch between the different operating levels, as required. Other applications could include the control of various motors, pumps and other devices requiring various control voltages. In addition to the above, rotary switches can also be found in a variety of equipment, ranging from medical to aeronautical, where a rotating knob is needed to select a particular function as dictated by the conditions present in that specific setup. In addition, these switches can also be found in consumer electronics, such as soft-start boom boxes and TVs.

Working Principle

The basic principle of operation of the 71EDF30-05-2-AJN Rotary Switch is as follows. The switch is rotatable, with a number of positions, which are determined by the number of available "phases" or inputs. When the switch is turned, each position or phase picked up by the switch is then sent, as an electrical signal, to the device, for example, a motor, that the switch is controlling.Now, the switch can allow for one of several different electrical signals to be sent, depending on the specific requirements. For instance, the switch can be set up to send a high voltage signal to the device if the switch is in the first position, a medium voltage signal to the device if the switch is in the second position, and a low voltage signal to the device if the switch is in the third position. A further fourth position can be used to turn off the device completely if desired.

Conclusion

The 71EDF30-05-2-AJN rotary switch is a versatile and reliable rotary switch, which has a wide range of applications in industrial automation, aircraft and consumer electronics. The working principle of the switch is relatively simple and is based on the principle of rotation of the switch, which sends out different electrical signals to the device, machine or process that it is controlling depending on the position of the switch.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description