72215LB10TF

Introduction to 72215LB10TF

72215LB10TF is a type of logic first-in-first-out (FIFO) memory. It is a low power memory storage device used for temporary data storage and transfers between hardware or software components. FIFO memories are often used as buffers within applications to handle data transfers between synchronous components operating at different rates. FIFO memories are often used in communication systems and digital signal processing (DSP) systems.

Application Field of 72215LB10TF

• Wireless Communication Systems
  • Cellular Phones
  • Wi-Fi (Wireless fidelity) Networks
  • Bluetooth Networks
• GPS Navigation Systems
• Industrial Automation
• Printed Circuits Boards
• Automotive Applications
• Voice Recognition Systems.

Working Principle of 72215LB10TF

72215LB10TF is a type of static RAM (SRAM) FIFO memory which is used for both read and write operations. The 72215LB10TF FIFO memory works on the principle of “First-In, First-Out”. It consists of a memory array, write controllers and read controllers. It uses dual ported RAM which can be read and written simultaneously without any conflict. It can store both binary and serial data. It has two ports, one for writing data and the other for reading data.

The 72215LB10TF memory has separate controllers for reading and writing operations. The write controller can store data in a specific order and the read controller can read the data in the same order. Data is written in the FIFO memory sequentially in the form of frames while the read controller will always read the data at the same rate by following a fixed protocol.

The 72215LB10TF FIFO memory has an internal 24 bit pointer which is used to keep track of the data written and read in the FIFO memory. This pointer will always be updated after each write and read operation. When the read controller reads the last data in the FIFO memory, the pointer is also reset to 0.

Conclusion

72215LB10TF is a first-in-first-out (FIFO) memory which is used for both read and write operations. It is used for temporary data storage and transfers between hardware or software components. This type of memory is often used in wireless communication systems, GPS navigation systems, industrial automation, printed circuit boards, automotive applications and voice recognition systems. It follows the principle of “First-In, First-Out” and consists of a memory array, write controllers and read controllers.