7283L15PAI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 7283L15PAI8 Logic-FIFOs Memory belongs to a family of first-in first-out (FIFO) registers that provide storage and retrieval of data. It is a very common type of memory used in today’s microcontroller-based systems. This type of memory allows for the passage of data from one point to another without concern for the processing order of the data. This type of memory is often found in serial communications, data acquisition systems, and consumer electronics.

The 7283L15PAI8 is a 1Kbit FIFO that is organized as 128 sequences, each of 8 bits, or one byte each. The FIFO can work in both byte and block modes, where the choice of byte or block mode is determined by the mode bits, D7 and D6. When in byte mode, the data is stored and retrieved one byte at a time. When in block mode, data is stored and retrieved in blocks of four bytes.

The main purpose of FIFO memory is to facilitate the quick and efficient transfer of data from one point to another. This is done by using FIFO memory as a type of buffer memory. A buffer memory is simply a holding area located between two devices in a system where it stores data until the receiving system can read it for further processing.

The 7283L15PAI8 has two different control inputs, clock signal and read/write. The clock signal is used to synchronize the data movement through the memory circuits and to ensure that data is stored and retrieved in the same order as they were received. The read and write signals are used to enable data to enter or leave the FIFO memory. This type of logic is known as ‘first in, first out’ logic.

The 7283L15PAI8 also has a number of other important features. It contains a flag output pin that can be used to signal the presence of data in the buffer. This internal flag is set when the data present flag (DPF) bit is set. The flag output pin is set from the rising edge of the clock when the DPF flag is set, and is cleared by a clear flag (CLF) signal. The 7283L15PAI8 also contains two other significant outputs called the write flag (WFA) and read flag (RFA). The WFA flag is set when the write pointer is pointing to the last byte that was written into the FIFO and the RFA flag is set when the read pointer is pointing to the byte that was last read from the FIFO.

The 7283L15PAI8 is often found in industrial applications such as embedded systems and robotics. This type of logic-based FIFO memory is very useful in these applications because it allows data to be stored and transferred in a controlled manner with minimal effort and processing time. Since the data is stored in a first-in, first-out order, it is easy to process and analyze the data received and sent by the system.

In addition, the 7283L15PAI8 can also be used in communications systems such as radio transceivers and digital data links. These systems need to be able to store and transfer data quickly and reliably, and the FIFO memory provides a solution for this need.

The 7283L15PAI8 also finds use in consumer electronics. Many modern digital cameras, for example, need to be able to buffered their live data before sending it through their communication link to another device for further processing. The FIFO memory allows for this process to be handled quickly and efficiently.

In summary, the 7283L15PAI8 is a very useful memory device that can be used in many applications where data needs to be stored and transferred in a controlled manner. It has a number of features such as flag outputs, write and read signals, and clear flag signals that make it effective in many applications. Additionally, its low power requirements and fast data transfer capabilities mean that it able to be used in a variety of scenarios, from industrial and communications applications to consumer electronics.

The specific data is subject to PDF, and the above content is for reference