7284L15PAGI8

Bus Directional:	Uni-Directional
Supplier Device Package:	56-TSSOP
Package / Case:	56-TFSOP (0.240", 6.10mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
FWFT Support:	No
Retransmit Capability:	Yes
Programmable Flags Support:	No
Expansion Type:	Depth, Width
Series:	7200
Current - Supply (Max):	125mA
Voltage - Supply:	4.5V ~ 5.5V
Access Time:	15ns
Data Rate:	40MHz
Function:	Asynchronous
Memory Size:	72K (4K x 9 x 2)
Part Status:	Preliminary

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 7284L15PAGI8 is a FIFO memory that allows for the temporary storage of data for later processing. It is a high-speed, low-cost device that is used in many different applications. This article will discuss the application field of the 7284L15PAGI8 and its working principle.

Application Field

The 7284L15PAGI8 is used in a variety of different applications. It is commonly used as a buffer in industrial and communication applications, such as serial communication between two devices. The FIFO memory is used to store data while it is being transferred and then released when it has been fully processed. This device can also be used in computer applications such as memory systems, where it is used to store data that is being read and written.The 7284L15PAGI8 is also used in data processing applications. This device can be used to store data for later retrieval and processing. It can also be used as an address look-up table, where it is used to store addresses of certain data points so that they can be quickly accessed. The FIFO memory is also used in high-speed motor control applications, where it is used to store commands and data for motor control and then release them when the motor is ready to receive the commands.

Working Principle

The 7284L15PAGI8 works by taking incoming data and stores it in its memory. There are two sides to the memory, the "write" side and the "read" side. The data is stored in the memory until it is taken out by the "read" side. The "write" side is responsible for writing new data into the memory, while the "read" side is responsible for retrieving the data. The data is stored in the form of "words", which are 8-bits in length. The FIFO memory can store up to 16 words, with each word representing a single 8-bit character.The 7284L15PAGI8 uses a "first in, first out" (FIFO) principle to manage its memory. This means that the first data written into the memory will be the first data taken out. The FIFO memory also has a "depth" setting, which determines the maximum number of words that can be stored in the memory. This depth can be changed depending on the application.

Conclusion

The 7284L15PAGI8 is a high-speed, low-cost FIFO memory that is used in a variety of different applications. It is used as a buffer in industrial and communication applications, as a memory system in computer applications, as an address look-up table in data processing applications, and in high-speed motor control applications. It works by taking incoming data and storing it in its memory until it is taken out by the "read" side. The 7284L15PAGI8 uses a "first in, first out" principle to manage its memory, and the depth of the memory can be changed depending on the application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description