7351-H-RC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common mode chokes, also known as common mode filters, are electromagnetic components consisting of insulating materials, coils, or ferrite cores designed to suppress (not eliminate) common mode noise. In general, common mode chokes are used in electronic circuits to block or reduce the amount of interference or interference from a power supply. Common mode chokes have been used in a variety of applications, from the early consumer electronics of the 1950s to today\'s high-powered microelectronics. One of the most commonly used common mode chokes is the 7351-H-RC, which has been designed with the application field and working principle in mind.

The 7351-H-RC is primarily used in applications related to power line noise, such as in industrial or home electrical noise suppression. It can be used in a number of various power circuits, such as power rectification, uninterruptible power supplies, and other power distribution systems. The 7351-H-RC is designed to reduce common mode noise in such applications, improve the signal-to-noise ratio, reduce radiated EMI in the power system, and protect the circuit against any transient surge.

The 7351-H-RC is also suitable for applications related to analog signals, such as medical, audio, and automotive systems. It is most commonly used in these systems to reduce noise that is generated by the transmission of DC, low frequency, and radio frequency signals. The 7351-H-RC can effectively reduce common mode current in such applications and prevent the introduction of any magnetic interference. The 7351-H-RC is also widely used in communication systems to reduce interference from external signal sources.

The 7351-H-RC is designed to work on the principle of inductive reactance, which is based on the linear relationship between the inductance of a coil and the frequency of the current passing through the coil. This relationship can be expressed as: Xc = 2πfL, where Xc is the inductive reactance in ohms, f is the frequency of the current passing through the coil, and L is the inductance of the coil in Henrys. The 7351-H-RC utilizes this principle to reduce common mode noise by creating an inductive reactance that is equal to or greater than the noise frequency. This inductive reactance will attenuate the noise, rather than eliminating it, thus allowing for its useful signal to be passed through the system.

The 7351-H-RC is also designed with a filtering component, such as a capacitor, to further suppress any noise. The capacitor is connected in parallel to the inductor so that it can filter any noise that is not postphoned by the inductor. This will ensure that only the desired signals are sent to the load, and any unwanted noise is suppressed. This also serves to protect the circuit from any transient surge or other high-frequency noise.

Overall, the 7351-H-RC is an effective and reliable common mode choke that can effectively reduce common mode noise in a variety of applications. It utilizes the principle of inductive reactance, as well as a filtering component, to effectively attenuate any noise that may be present in the system. The 7351-H-RC is suitable for a wide variety of applications, from power rectification to analog signal transmission, and has proven to be an invaluable component for many different electronic applications.

The specific data is subject to PDF, and the above content is for reference