7408SD9V8GE

Toggle switches are common micro switches that are widely used in electrical and electronic equipment. The 7408SD9V8GE is a single-pole double-throw (SPDT) on/off toggle switch that is both cost-effective and well-made. This toggle switch features a zinc construction, two built-in mounting holes, and a paddle switch design. It is rated for 6A (125Vac) and 3A (250Vac) with a maximum contact resistance of 500 mOhms.

The 7408SD9V8GE toggle switch can be used for a wide range of applications. It is commonly used in industrial equipment, consumer electronics, audio and video equipment, test and measurement equipment, medical devices, and more. Some specific applications include motor control, power routing, signal control, and signal isolation.

The 7408SD9V8GE toggle switch is a mechanical device that utilizes two sets of contacts to actuate when a switch is pushed or pulled. It features two sets of contacts, each typically consisting of a normally open (NO) contact and a normally closed (NC) contact. When the switch is in the position shown in the illustration, the NO contact is connected to the circuit and the NC contact is not connected. When the switch is moved to the opposite position, the NO contact is not connected and the NC contact is connected. This allows for two circuits to be switched on and off in the same manner.

The working principle of the 7408SD9V8GE toggle switch is relatively simple. As stated above, the switch utilizes two sets of contacts to actuate. When the switch is in one position, one set of contacts is connected and the other is disconnected. When the switch is moved to the opposite position, the sets of contacts are reversed.

The 7408SD9V8GE toggle switch is an ideal solution for a wide range of applications. This switch is easy to use, reliable, and cost-effective. Its versatility and reliability make it suitable for a variety of applications, including industrial equipment, consumer electronics, and more.