741C083470J Resistors

Number of Pins:	8
Height - Seated (Max):	0.020" (0.50mm)
Size / Dimension:	0.079" L x 0.039" W (2.00mm x 1.00mm)
Supplier Device Package:	--
Package / Case:	0804, Concave, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	741
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±5%
Resistance (Ohms):	47
Circuit Type:	Isolated
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

741C083470J, commonly known as a resistor network or array, is an electrical component consisting of multiple resistors connected in either a series or parallel configuration. The most popular type of resistor network is the 4-resistor type, consisting of four resistors connected in a parallel configuration. The resistors are usually of equal resistance value, and their total resistance is the sum of the individual resistor values.The simplest way to think about how a resistor network functions is to imagine it as a capacitor, but with resistors taking the place of the capacitor\'s plates. The resistors connected in parallel act like capacitors in that they each have a separate negative and positive connection point. The current flows through the resistors, but as the current reaches each point the voltage drops a little. This is due to the resistance of each resistor, and so the total resistance of the resistor network is equal to the sum of the resistors.Resistor networks are commonly used in a variety of applications, such as low-voltage power supplies, waveform shaping, and signal conditioning. In high-voltage power supplies, the array is connected in a series configuration in order to protect components from high voltage. The array is also used as a voltage divider in managing the precise electrical output of a circuit, as some components require an exact voltage level.In a transmission line, the resistor network can be used to filter out unwanted signals from the amplified signal, thus allowing for greater signal clarity. This is accomplished by adjusting the resistor values so that the total resistance is greater than the resistance of the circuit. This will allow only the frequencies of interest to pass through the resistor network, while the others are filtered out, resulting in a clean signal.The resistor network is also used in microphones and receivers to convert the sound energy into electrical signals. A microphone or receiver will contain two resistor networks, one to convert the electric energy produced when sound waves hit the diaphragm of the microphone into electrical signals. The other resistor network is then used to convert the electrical signals into audio signals, which are then amplified and sent on to be heard.Finally, the resistor network is used to measure voltages and currents in a circuit. By connecting two or more resistors together in a series or parallel configuration, it is possible to measure the voltage or current at different points in the circuit. By using the correct ratio of resistors in a particular application, the precise values of voltage and current can be determined.In summary, the 741C083470J resistor network is an important component in many electronics applications. It allows devices to be powered correctly and functions as a filter, signal conditioner, and voltage divider. It also provides a means to measure voltage and current in a circuit, enabling designers to optimize their designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description