742863160 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips are some of the most important components in electrical engineering. The 742863160 is one such component and its specific application and working principle will be discussed herein.

The 742863160 is a ferrite bead that can replace a chip inductor or use as an EMI filter, current sensing module or common-mode choke. It is mainly used for suppressing electromagnetic interference (EMI) noise caused by high-frequency switching noise on power lines and data lines. The bead is made up of a ferrite dielectric material that provides an impedance to act as a low-pass filter, blocking the passage of high-frequency noise.

The 742863160 ferrite bead is assembled with a series of capacitors and resistors connected in parallel with it. This combination provides a two-stage EMI filter that effectively eliminates high-frequency noise, while allowing low-frequency signals to pass through. In addition, the various components are arranged in an arrangement called an LC bead which provides an impedance of DC (and AC) current flow, limiting the amount of interference (humming) that can reach the receiver.

The working principle of the 742863160 ferrite bead is based on the operation of the LC resonator circuit. The bead contains a dielectric material such as ferrite or ceramic, and two metal plates (electrodes) with opposite electrical charges that can be either negatively or positively charged. The two electrodes are then wrapped around the ferrite, forming a dielectric cavity between them. When current is applied to the bead, an alternating magnetic field is generated in the dielectric cavity that causes losses in the electrical current, ideal for EMI filtering.

The advantages of the 742863160 ferrite bead are its small size and its ability to handle high voltage. This makes it suitable for a variety of applications such as automotive electronics, computers, audio-visual equipment, and medical equipment. It is especially useful in applications where a large amount of high-frequency noise needs to be eliminated. Moreover, it can operate in a wide temperature range, from -40°C to +85°C, making it very reliable. Additionally, it is also RoHS compliant.

Overall, the 742863160 ferrite bead is an extremely useful device that can be used in numerous applications. Its use as an EMI filter and current sensing module makes it an ideal choice in many cases, as it can effectively eliminate high-frequency noise, while allowing low-frequency signals to pass through. Additionally, its small size and wide temperature range make it a very reliable component.

The specific data is subject to PDF, and the above content is for reference