742C08349R9FP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 742C08349R9FP is a resistor network manufactured by Caddock Electronics and is used to provide electrical isolation in a wide variety of applications. The network is composed of a single series of resistors which are interconnected in a “ring-like” fashion, providing an “array” of resistance values. As such, this type of resistor network is typically categorized under “Resistor Networks, Arrays”.

Application Field

As a resistor array, the 742C08349R9FP is most commonly used to provide isolation between two or more electrical circuits. This type of network is commonly used in analog circuits, such as voltage regulators, audio amplifiers, and other types of analog circuits. In many applications, the voltage levels present on the circuit may be incompatible with the voltage ratings of the resistors used. In this case, a resistor network can be used to isolate the circuits while still offering the desired resistance value.

The 742C08349R9FP can also be used as a high-precision current sense resistor in DC or AC circuits. It can be used to accurately measure and monitor the current draw in a particular circuit. This type of network is often used in power supplies, motor control applications, automotive circuits, and other current-sensing applications where accuracy is essential.

In addition, the 742C08349R9FP can be used in telecommunications applications to provide adjustable impedance matching. This allows for an efficient transfer of signals over different frequencies while helping to prevent distortion caused by mismatched impedances. This type of resistor network also provides a high level of signal isolation for applications like radio frequency (RF) transmitters and receivers.

Working Principle

The 742C08349R9FP resistor network is composed of series-connected resistors, with each resistor being located in its own separate terminal. The network is then connected to the circuit or subsystem by a pair of common terminals, which are usually shared among the resistors. This arrangement provides a high level of electrical isolation, allowing for the adaptation of different voltage levels, while still providing the desired resistance values.

The resistors in the 742C08349R9FP are connected in a particular pattern, which is determined by the application. The configuration of the resistors determines the resistance values of each resistor. When combined, the resistors form a single, series-connected array that provides a range of resistance values. This range of resistors can be adjusted to meet the specific resistance requirements of the application.

In addition, the 742C08349R9FP can be used in current sensing applications. The network is usually connected between two circuits, with each circuit possessing its own voltage and current ratings. The current sensor is then connected between the two circuits, and the resistance values of the individual resistors can be adjusted to accurately measure the current draw. As the current draw on one circuit increases, the resistance of the “current sensing” resistor decreases, allowing for precision measuring of current.

Conclusion

The 742C08349R9FP is a resistive network manufactured by Caddock Electronics which is used in a wide variety of applications. The network is composed of a series of interconnected resistors which are configured in a particular pattern to provide a range of resistance values. The network provides a high level of electrical isolation, allowing for the adaptation of different voltage levels. In addition, the resistors can be adjusted to provide precise current-sensing capabilities. As a result, the 742C08349R9FP is a versatile resistor array which can be used in a variety of applications within the field of Resistor Networks, Arrays.

The specific data is subject to PDF, and the above content is for reference