743C083823JP

Series:	743
Packaging:	Tape & Reel (TR)
Part Status:	Active
Circuit Type:	Isolated
Resistance (Ohms):	82k
Tolerance:	±5%
Number of Resistors:	4
Resistor Matching Ratio:	--
Resistor-Ratio-Drift:	--
Number of Pins:	8
Power Per Element:	100mW
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 125°C
Applications:	--
Mounting Type:	Surface Mount
Package / Case:	2008, Concave, Long Side Terminals
Supplier Device Package:	--
Size / Dimension:	0.200" L x 0.079" W (5.08mm x 2.00mm)
Height - Seated (Max):	0.028" (0.70mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 743C083823JP is a type of resistor network, and it is increasingly being used in many fields. This type of resistor network allows electricity to pass from one point to another in a certain pattern and at a predetermined strength. They are designed to reduce current, resistors being the main component in an electrical circuit.A resistor works by converting electrical current to another form of energy which is dissipated as heat. The 743C083823JP is designed to perform this conversion in a single package, using a series of resistors connected in a particular pattern. For instance, a combination of four resistors connected in series and in parallel is referred to as a bridge network.The 743C083823JP is primarily used to divide a given voltage into smaller voltages. This is achieved by connecting each of the four resistors to the terminals of a power source. When voltage is applied to each of the resistors, a small voltage will be produced at each terminal. The magnitude of the voltage obtained at any of the terminals depends on the value of the resistor connected to it.The 743C083823JP also works in an alternative manner, by connecting the four resistors in parallel and connecting them to two points. This will result in a higher voltage at the two terminals, and the magnitude of the voltage will depend on the required value of the resistor. The 743C083823JP is widely used in applications such as digital signal processing, data acquisition systems and automotive electronics. It is also used to provide precise current control in electronic circuits, and is commonly found in motor control systems and electric power supplies. The 743C083823JP is also useful in other applications such as producing active filters, voltage dividers, level detectors, power amplifiers, and small signal amplifiers. This resistor network is particularly useful in applications where precise current control is required, such as for the control of motors, and for controlling the output of an amplifier.The working principle of the 743C083823JP is relatively simple. The four resistors are connected in a particular pattern, and the voltage at any one of the terminals dependent on the value of the resistor connected to it. For instance, when the voltage at any terminal is high, a large amount of current will flow through the resistor, and the voltage will correspondingly decrease. Similarly, when the voltage at any terminal is low, less current will flow through the resistor, and the voltage will correspondingly increase.The 743C083823JP is a highly efficient and reliable resistor network, and is an essential component for applications where a high degree of precision is needed. In addition, the device is extremely easy to use and install, making it suitable for people who have limited knowledge in electronics. Overall, the 743C083823JP is an efficient and reliable resistor network, and it is sure to become even more popular in the future.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description