744156

DC Resistance (DCR):	70 mOhm Max
Height - Seated (Max):	--
Size / Dimension:	1.732" Dia x 0.610" W (44.00mm x 15.50mm)
Supplier Device Package:	--
Package / Case:	Radial
Mounting Type:	Through Hole
Inductance Frequency - Test:	10kHz
Operating Temperature:	-40°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	1.5MHz
Q @ Freq:	--
Series:	WE-SI
Shielding:	Unshielded
Current - Saturation:	2A
Current Rating:	6.2A
Tolerance:	±20%
Inductance:	380µH
Material - Core:	Ferrite
Type:	Toroidal
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Introduction

A fixed inductor is a type of electronic component used to store electrical energy at a predetermined rate. This type of component has a fixed inductance value that is determined by a coil of wire and a set of cores in a core-and-coil assembly. The core material of a fixed inductor is typically made of ferrite or iron powders and other materials that create a strong magnetic coupling between the wires of the coil.Fixed inductors exist in a number of different shapes and sizes, and their applications can vary from simple DC circuits to complex switch mode power supplies. By controlling both the current and the voltage applied to the inductor, a desired inductance value can be set and stored in the system.

744156 Application Fields and Working Principles

The 744156 is an example of a fixed inductor, which is commonly used in circuits that require a stable inductive load. This type of inductor can be used to limit the amount of current flow in a circuit and to minimize the amount of voltage drop across it.The 744156 fixed inductor consists of a single coil of wire wound onto a ferrite core. The core material used for the 744156 is an iron/aluminum hybrid, which creates a strong magnetic coupling between the wire and the core. This strong magnetic coupling creates an inductive field that produces the least amount of electrical resistance for the given inductance value.The working principle of the 744156 is based on Faraday\'s law, which states that a voltage is induced in an inductor whenever there is a change in the magnetic field around it. As long as a steady current is applied to the inductor, no voltage will be induced in it. However, if the current arising through the inductor suddenly increases or decreases, a small voltage will be generated as a result.The 744156 is typically used in a variety of different applications. One of the most common applications is in DC-DC converters, where the inductor is used as a filter to reduce the ripple present in the output voltage. Other applications include power supply circuits, RF circuits, inductive heating, and high-frequency switching circuits.

Conclusion

Fixed inductors are a type of electronic component that is used to store electrical energy at a predetermined rate. The 744156 is an example of a fixed inductor, which is often used in DC-DC converters and other circuits as a filter to reduce the ripple present in the output voltage. The working principle of the 744156 is based on Faraday\'s law, which states that a voltage is induced in an inductor whenever there is a change in the magnetic field around it. Fixed inductors are typically made of ferrite or iron powders and other materials that create a strong magnetic coupling between the wires of the coil.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description