744228S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes, such as the 744228S, are used mainly for filtering high frequency signals from power lines. This type of choke operates on the principle of inductive impedance, whereby the impedance increases with frequency. This helps to reduce the amount of high frequency noise that is conducted through the lines while maintaining the desired signal levels.

The 744228S is designed specifically for applications where voltage surges on power lines can be a concern, such as in telecommunications equipment, industrial plant and machinery, and renewable energy systems. It has good noise suppression performance, with a high impedance over a range of frequencies from 50MHz to 100MHz. As an added benefit, it also has a low saturation current.

The 744228S is made from a combination of ferrite cores and copper windings. The ferrite cores provide the inductive effect and the copper windings carry the current. The ferrite cores also help to improve the overall noise suppression performance of the choke.

The 744228S works by providing a path for high frequency noise to pass through, which is then filtered out. This type of choke helps to reduce the amount of interference that may be caused by high frequency noise on the power line and allows for a clean signal to pass through. Since the impedance of the choke increases with frequency, it can be adjusted to different frequencies depending on the application.

In addition, the 744228S has low resistance across the whole frequency range, which helps to ensure that the desired signal is transmitted without any distortion. This is especially important in telecommunications systems and other sensitive equipment. In addition, the choke also has high common mode impedance which helps to reduce noise in the high frequency range.

Overall, the 744228S works by providing an effective way to filter high frequency signals from power lines while allowing clean signals to pass through. Its high impedance, low resistance, and low saturation current make it an effective tool for reducing interference and ensuring the desired signal is transmitted with no distortion.

The specific data is subject to PDF, and the above content is for reference