Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes

The 7446722007 is a common mode choke that is typically used in industrial and electronic applications. It utilizes electromagnetic induction to reduce the noise or interference that can occur in sensitive electrical components. Common Mode Chokes are also known as Common Mode Noise (CMN) filters and are typically used to minimize interference caused by electrostatic fields, ground loops, and low-frequency fields. This type of choke is ideal for suppressing signals that can cause signal errors, distortion, and/or malfunction.

Applications

Common Mode Chokes are primarily used in the fields of process automation and advanced industrial automation, medical system and applications, as well as other industrial applications where cost-effectiveness is a priority. It is also used in motor drives, power supplies, routers, and data communication systems. In addition, these chokes are suitable for installation in circuit boards, enclosures, and jumper assemblies.

Working Principle

A common mode choke works by using electromagnetic induction to reduce the noise or interference that can occur in sensitive electrical components. It works by creating an inductive barrier around the power lines and thereby dampening any interference that may occur between them. When an electrical signal passes through the choke, it creates a magnetic field, which traps the high-frequency energy and reduces the interference in power line.

The Common Mode Choke works by presenting an inductive reactance to any frequent current. This means that it requires more power to flow through it than would be required by a single open-circuit element. The higher power level produces an electromagnetic field, which then reduces the high-frequency energy of the circuit. This in turn reduces the noise and interference in the system.

Common Mode Chokes can also be used as surge protectors in some power supply systems. When the power supply is exposed to high transient currents, the inductive field created by the choke absorbs energy, resulting in the power supply staying within acceptable levels. This helps the system stay within its specified limits, eliminating the risk of damage.

Installation

Installing a Common Mode Choke is relatively easy. It should be mounted in an enclosed space with enough space around it so that the air does not become too hot and the magnetic field created by the choke will not disturb other components. The choke should also be placed so that there is adequate ventilation to keep it cool. The choke should also be connected directly to the power line and not through any frame grounding.

When installing common mode chokes, it is important to ensure that the leads (or wires) are connected correctly so that the power is correctly regulated and the choke does not cause any damage to the device. The wires should be tied into the terminals of the power line with the leads running toward the choke. If the leads are connected in the wrong order, the choke may become damaged and cause surges in the power line.

Conclusion

The 7446722007 is a common mode choke that is used to reduce noise and interference in a variety of power device applications. It works by creating an inductive barrier around the power line and thereby dampening any interference that may occur between them. This type of choke is ideal for suppressing signals that can cause signal errors, distortion, and/or malfunction. The installation of this device is relatively easy and, when installed correctly, can protect the power supply and keep it within its specified limits. Therefore, the Common Mode Choke is a very useful device in the industrial and electronic activities.

The specific data is subject to PDF, and the above content is for reference