745C101202JP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The 745C101202JP is a resistor network, or array, which consists of a variety of resistors connected together in specific patterns. It is a two-part series-termination network that combines two resistors in a series configuration. The first resistor has a component value of 1 ohm, and the second is a 5 ohm resistor, which is directly connected to ground. This creates a total resistance of 6 ohms, which is divided across the two resistors in the same manner as the traditional voltage-divider arrangement. This, in turn, allows the network to be used as a passive voltage-divider, or passive filter.

The 745C101202JP has several advantages as a resistor network. First, it has a relatively low resistance value, which allows the network to work effectively even when the total resistance of the circuit is small. Second, it is designed with a low tolerance, allowing it to be used in applications where high accuracy is necessary. Third, it is less prone to parasitic reactance due to its two-part series configuration, which reduces its impedance. Finally, it is designed to be robust and temperature resistant, making it suitable for use in a wide range of operating conditions.

The 745C101202JP is used primarily in applications that require a passive voltage divider, or filter. These types of applications typically involve AC signal conditioning, voltage regulation, and noise control. In this type of application, the network is usually connected in parallel to a power supply, with the output of the resistor network being used as the signal input for the device. The network is then used to actively attenuate the signal at specific frequencies, while still allowing a uniform signal output.

In addition to its use as a voltage divider, the 745C101202JP can be used in other passive filtering applications. It can be used to create low-pass and band-pass filters, as well as notch filters. Low-pass filters allow only low-frequency signals to pass through, while band-pass filters allow a specific range of frequencies to pass through. Notch filters are often used to attenuate specific frequencies, such as noise from nearby power lines or radio transmitters. The network can also be used to create a multiplexer, which is a device that simultaneously combines two or more input signals to create a single output signal.

In summary, the 745C101202JP is a two-part series-termination network that consists of a 1 ohm resistor and a 5 ohm resistor. It is used primarily as a passive voltage-divider, or passive filter, in AC signal conditioning, voltage regulation, and noise control applications. In addition, it can be used to create other types of passive filters, such as low-pass and band-pass filters, notch filters, and multiplexers. The network is designed with a low resistance value and low tolerance level, making it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference