74ABT125CSJX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ABT125CSJX is a single-channel buffer IC that is available in a variety of packages and voltages to suit a range of application circuits. The device can be used to provide high-impedance input buffering and low-level or voltage-referenced signaling. It offers a broad range of applications in logic-level systems, such as driving high-current anodes, extending logic levels, and recovering signals from a common source. The device is a good choice for circuits that require frequent interface to slow logic inputs.

The 74ABT125CSJX is designed to operate from a single 5V supply, providing power savings and reduced power dissipation. The device features a high-speed and low-power 3-state output, as well as an active-low enable pin. The output can be configured as an open-drain or a totem-pole drive. The buffer is ideal for use in multi-driver applications, and can be used to provide logic-level isolation between devices.

The 74ABT125CSJX is part of a family of buffers and is designed to support logic and data transfers between circuits operating at different voltage levels. The device features a high-speed CMOS design and is capable of data rates up to 200MHz. It has a low propagation delay and skew, making it suitable for applications with high switching frequency requirements. The device also features a bus hold feature, which allows the output to remain in the last state until a new input is detected.

In terms of working principle, the 74ABT125CSJX consists of a pair of complementary MOS transistors. When the enable pin is set to “low”, the transistor pair acts as an inverter, allowing the input signal to be passed to the output unchanged. When the enable pin is set to “high”, the transistor pair is turned off and the output of the device is in the high-impedance state. This feature makes the device ideal for applications where power saving is a priority.

The 74ABT125CSJX can be used in a wide range of applications, including digital logic, timings and control, as well as data transfer and interrupted transmissions. The device can be used to provide buffering and isolation, as well as to provide open-drain outputs for low impedance signaling. In addition, the device is capable of supplying up to 16mA of current, making it suitable for driving LED and other low power devices.

In conclusion, the 74ABT125CSJX is a single-channel buffer IC that offers reliable logic-level buffering, isolation and open-drain output capabilities. It is designed to operate from a single 5V supply and features a high-speed CMOS design with low power consumption. The device is ideal for use in high-speed logic-level systems to provide buffering, extend logic levels and recover signals from a common source.

The specific data is subject to PDF, and the above content is for reference