74ACT163TTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT163TTR is a high-performance fully static, fast edge–triggered, four-stage synchronous binary counter with synchronous parallel load capability, programmable lookahead carry, and multiplexed I/O. The counter consists of four master–slave flip–flops with complementary outputs and common asynchronous reset. All clock inputs of each stage are driven from the same external clock signal. The device supports up to three cascaded stages for an eight–bit or decade counter.

The 74ACT163TTR synchronous programmable counter has a variety of application fields and is used to count a number of pulses, including time, frequency, and related activities. It can be used in digital systems with the appropriate logic circuits for various counting applications, since it counts in either a binary or decade system.

The 74ACT163TTR application field covers a wide range of counting small numbers of events in a very short period of time. It can easily be used in digital systems to count the frequency of electrical signals, such as frequency dividers, timers, frequency counters and event counters. The 74ACT163TTR synchronous counter is also used in digital oscilloscopes, logic analyzers and other test and instrumentation systems that require a fast response and reliable operation.

The 74ACT163TTR chip has a built-in parallel load capability. This allows it to be easily re-programmed to count any 4-bit sequence. A number of probe packages are available to interface this chip with any type of logic circuit or system. The device supports multiplexed I/O for easy external connection to input and output logic gates.

The working principle of the 74ACT163TTR synchronous programmable counter is based on sequential logic. The device has four stages in which the clock signal is used to toggle the output between high and low states according to the programmed input sequence. The counter uses D flip-flops to store the data at each stage. The clock signal is used to access the stored data at each stage. The counter can be configured to count up or down and can also be used in either binary or Gray code format.

The device also features a programmable lookahead carry feature that allows a maximum of four clocks between the two halves of the counter, thus providing a faster counting operation. The lookahead carry feature is used to prevent the occurrence of any glitches while counting up or down. The 74ACT163TTR has an external clear input that is used to reset the counter to the count of zero. The output enable (OE) line can be used to enable or disable the output of the counter.

The 74ACT163TTR is an ideal synchronous programmable counter for digital systems that require very fast response time, reliability and low power consumption. The device is easy to configure and provides an efficient way to count up to sixteen events in a very short period of time. Its ability to be reprogrammed makes it a versatile solution for both standard applications and custom counting requirements.

The specific data is subject to PDF, and the above content is for reference