74AHC1G125GV,125

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-buffers, drivers, receivers, transceivers are devices used to strengthen a signal coming from one part of an electrical system and driving it to another. The 74AHC1G125GV,125 is a high-speed level-shifter driver which belongs to this logic family It is a single-channel non-inverting buffer/converter which enables real-time logical level translating between a low-voltage TTL logic system and a higher voltage CMOS logic system.

The device has a power supply voltage of 3-5 V, and is rated for an operating temperature range from -40° to +85° C. It has a slew rate of 8 V/ns, meaning it can accept a large amount of current on the input side and output the same on the output side. The input and output impedance of the device is typically in the range of 5-50 ohms.

The 74AHC1G125GV,125 is used to build logic-level translators. It is commonly used in industrial applications such as automotive, avionics, rail and power systems where logic levels need to be translated from one side to the other. The device is also often used as a buffer or repeater between the two systems to ensure that signals are transmitted reliably and accurately. In addition, the 74AHC1G125GV,125 is also used in applications such as high-current voltage protection circuits and switch mode power supplies.

The working principle of the 74AHC1G125GV,125 is very simple. It uses a differential amplifier in order to provide a level-shifting buffer between two logic systems. The device has two input pins, INa and INb, and two output pins, OUTa and OUTb. When both inputs are on the same logic level, the outputs are also on the same logic level. If one of the input is on a different logic level, the output will change in order to match the other input. This allows the device to serve as a translator between the two logic systems.

In conclusion, the 74AHC1G125GV,125 is a high-speed single-channel non-inverting buffer/converter which operates between a low-voltage TTL logic system and a higher voltage CMOS logic system. The device is primarily used in industrial applications to build logic-level translators or as a buffer or repeater between the two systems. Its working principle relies on the differential amplifier to provide a level-shifting buffer between two logic systems.

The specific data is subject to PDF, and the above content is for reference