74AHC241BQ,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Buffers, Drivers, Receivers, Transceivers play an integral role in the way digital electronics works. This article aims to discuss the application field and working principle of a specific type of logic device, the 74AHC241BQ,115.
A 74AHC241BQ,115 is an 8-bit non-inverting buffer/line driver with 3-state output. It is IC logic device that functions as a two-way buffer for a data line, meaning that it will convert an input signal that is to be transmitted across a data line into a logic one or logic zero, with the output logic state dependent on the logic state at the input. All eight bits must maintain the same logic state at their respective inputs in order to have all eight bits carry the same output. In the event that one of the bits has a different logic state from all the others, the output from all 8 bits will be in a high-impedance state and will not affect the overall circuit.
The74AHC241BQ,115 is used in a number of different applications, and is most commonly used in communications systems as a line driver, as well as for interfacing between two digital systems, or for driving LEDs for display purposes. It is also used for multiplexing applications.

The device uses an ECL (emitter coupled logic) system in order to maintain consistent logic levels across the data line. This system works by passing current through transistors in order to control the voltage on the data line. In the 74AHC241BQ,115, the transistors are connected in a common emitter configuration, with emitter current representing the logic “0”, and a transistor in the OFF state representing the logic “1”. This allows for relatively low power dissipation compared to other logic families, while still maintaining high switching speeds.
The 74AHC241BQ,115 also uses an open-collector system to drive the output. In this system, a pull-up resistor is connected to the output of the chip and is used to provide a logic "1" voltage, as no current is passed through the transistor in the OFF state. A logic zero is provided by passing current through the transistor in the ON state, essentially sinking the current. This allows the device to be used either as a buffer or a line driver, depending on the application.

The 74AHC241BQ,115 is relatively easy to use, with the input and output logic states determined by the logic levels present at the inputs. The “enable” pin can be used to turn the device on and off, allowing it to be used in interrupt applications as well as multiplexers. Additionally, the device can be used as a 3-state logic buffer to prevent any current flow between multiple systems.

Overall, the 74AHC241BQ,115 is a versatile and reliable logic device that can be used in many applications. It is easy to use and provides good switching speeds and low power dissipation, making it a great choice for many logic systems.

The specific data is subject to PDF, and the above content is for reference