74AHC1G79GW,165

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AHC1G79GW,165 is a logic device classified as a Flip Flop, which is used widely in digital applications. Flip Flops can serve a few specific roles in digital circuits. Generally, they are used to store a single bit of data and can be used for synchronization in digital circuits. This particular model of Flip Flop is classified as a single data input, set-reset Flip Flop.

The logic device is also known and classified as a Latched Logic Flip Flop. The basic function of this type of Flip Flop is to latch, or store a logic 1 or 0 which is set by a single data input from a switch, logic gate or transistor. It can also be used in a clocked operation wherein the input data is set or reset in response to the state of an external clock source.

The 74AHC1G79GW has two inputs, the Data input and the Clock Input. The data input can be used to set or reset the flop to either a logic 1 or 0 depending on the logic state present at that input. The lock input is used to turn the latch on or off. When the clock output is high, the latch is enabled and the data present at the data input will be latched into the flip flop.

The 74AHC1G79GW,165 also has two outputs, Q and not Q. The Q output corresponds to the logical state set or reset at the data input. The Not Q output is the logical inverse of the Q output. This device is a single latch logic element which is activated by the clock, and deactivated when the clock is low. The state of the latch at that point is dependent on the logic state at the data input.

The 74AHC1G79GW,165 is used widely in digital applications for data storage, synchronizing oscillators, transmission shift registers and counters, as well as industry specific applications where timing and synchronization are important. Microcontrollers and microprocessors utilize these flip-flops in order to function accurately and timely. It is also used in memory devices as part of the address decoding scheme. Computer buses and routers can use flip-flops to store address information and routing data.

In short, the 74AHC1G79GW,165 is a single input, latched logic flip-flop device. When the clock is enabled, the data bit is latched into the flip-flop and stored at its two outputs, Q and Not Q. This logic device is used in many digital applications requiring synchronization and timing, as well as in address decoding memory devices. The 74AHC1G79GW is a reliable and efficient way to store single bits of data in digital systems.

The specific data is subject to PDF, and the above content is for reference