74AHCT132BQ-Q100X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic gates and inverters are a significant part of digital technology and the basis for many of today\'s electronic items. Among the most significant gates and inverters used in the realm of digital circuitry is the 74AHCT132BQ-Q100X. Its application field and working principle is one that’s been studied by engineers and technicians alike.

74AHCT132BQ-Q100X is an extension to the popular 74AC/AHCT series of logic gates, widely used and found in most of today\'s personal computers, laptops, tablets and other devices. It is an expanded version of the 74ACT series with higher current drive and a maximum possible gate delay of about 20 nanoseconds.

The 74AHCT132BQ-Q100X is designed for use in data transmission, where signals must travel quickly between different types of devices. Because it is part of the 74ACT series, its main purpose is to convert TTL and CMOS logic voltages into signals for efficient data transmission. The gate itself includes two inverters, one non-inverting gate and one buffered output.

The application field of 74AHCT132BQ-Q100X is in the design of various communication interface logic circuits such as data networks, data communication links and serial/parallel conversion. It is also used in multiplexing applications, as its ability to handle logic signals converts more than one input into a single output. Furthermore, its low propagation delay of approximately 20 nanoseconds makes it ideal for high speed applications.

The working principle of 74AHCT132BQ-Q100X is that it provides four independent two-input AND gates with buffered outputs. Each gate provides high speed logic ANDing with the corresponding input signals. It also allows for the slow rising and falling Edge detection that ensures correct logic latency performance. The input pins, typically P, are tied to the appropriate logic voltage depending on the logic family being used. An input pin of 0 logic is connected to ground, while an input pin of 1 logic is tied to the appropriate supply voltage.

The output pin then produces a logic 1 output when the two inputs are both 1, or a logic 0 output when the two inputs are either 0 or mixed states. The 74AHCT132BQ-Q100X also offers an open-drain response to either the P or N input. This permits the circuit to either wait for a logic high or low from rest, or to drive both pins from the same output. This open-drain design allows for wiring both input pins together, thereby providing a single-input logic level detector.

The 74AHCT132BQ-Q100X offers features such as low power consumption, good noise immunity, high speed operations and high noise margin. It also offers ripple-blocking power supply noise protection, making it ideal for use in sensitive systems. These benefits combined make the 74AHCT132BQ-Q100X an attractive option for multiplexing, data transmission and logic interface circuits in various applications.

The specific data is subject to PDF, and the above content is for reference