74AHCT1G125GM,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AHCT1G125GM,115 is a logic device that falls into the logic “buffers, drivers, receivers, transceivers” category. This logic device is a single non-inverting buffer gate that features a low-voltage CMOS version of the 74LS family of digital gates. This device makes use of an input and output voltage of 1.2V-3.6V and is comprised of an Input Rise and Fall Time of 1.5ns and output rise and fall time of 1.5ns. These logic devices are mainly used in range of low voltage applications such as mobile phones, game consoles, and embedded systems.

This logic device also has quite a few operating temperature ranges from -40℃ to 85℃ and its power supply voltage lies anywhere between 2.3V to 3.6V for its nominal supply current to flow through. In addition, the output slew rate specified for this device lies in between 0.6V/μs and 1.6V/μs. That is why its TTL compatible input makes it easier to interface other logic devices.

The 74AHCT1G125GM,115 logic device provides enhanced speed, rich I/O structures, and is capable of driving the shortest of the output structures. This device has high performance and its noise margin is better than that of the LS Family. It also offers protection against Power-up/power-down, overdrive, and latch-up. With its high-speed performance and low output impedance, it can easily drive large capacitive loads and long bus lines.

The 74AHCT1G125GM,115 buffer gate is most commonly used in applications where data speed and reliability are important. Some of these applications include edge-triggered flip-flops, multiplexers, telephone switching systems, and in a wide range of interfaces. This device can also be used in memory address decoding and data transmission paths. In addition, it can be used in analog-to-digital and digital-to-analog converters and as a level translator.

The working principle of this logic device is relatively straightforward. The 74AHCT1G125GM,115 logic gate utilizes logic levels to determine its inputs and results. Depending on whether the input is logical ‘0’ or logical ‘1’, a corresponding bit will appear at the output of this device. For instance, if receive an input ‘1’, the output will be logical ‘1’ and if an input of ‘0’ is received the output will be logical ‘0’. This logic applies to all other values that are input into the circuit.

In conclusion, the 74AHCT1G125GM,115 logic device is ideal for low voltage applications where data speed and reliability are important. This device can be used for applications such as edge-triggered flip-flops, multiplexers, telephone switching systems, memory address decoding, data transmission paths, analog-to-digital and digital-to-analog converters, and as a level translator. Moreover, the working principle of this device is straightforward and involves logic levels that determine the inputs and outputs corresponding bits at the output of this device.

The specific data is subject to PDF, and the above content is for reference