74AHCT1G126W5-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AHCT1G126W5-7 is a high-speed single to one buffer designed for FPGA and ASIC applications. This device is used mainly to protect the output of a transmitting circuit from destructive reflections caused by a short circuit in the receiving circuit. It is also used to gain better isolation between the input and output circuits due to its longer propagation delay.

The 74AHCT1G126W5-7 can operate with logic inputs as low as 1.65V and as high as 5.5V. It is also able to withstand an absolute maximum voltage of 7V. This makes it suitable for different application fields such as process control, automotive, communications, and industrial automation. It is also suitable for different operating temperatures ranging from -40 °C to 85 °C.

The 74AHCT1G126W5-7 is controlled by two control inputs, A0 and A1. It has two output signal types, active-low and active-high. The signal is buffered and inverted to the appropriate output state depending on the value of the control inputs. The supply voltage can range from 2.3V to 3.6V, which make it more suitable for low power applications.

The output voltage swings are guaranteed to be between 0.1V and VCC. It has a typical propagation delay of 1100ns typical at 5V and a maximum propagation delay of 1300ns at 5V.

The 74AHCT1G126W5-7 uses Push-Pull Buffer and Comparator topologies to provide an output buffer. The Push-Pull Buffer provides a fast transition and requires only a small area of silicon real estate. The Comparator provides a higher speed, smaller propagation delays and lower power consumption.

The 74AHCT1G126W5-7 is also built with Schmitt-trigger inputs that allow for very clean input signals, rejection of noise and low hysteresis. This makes it ideal for applications where noise is a problem. The maximum propagation delay makes it easy to synchronize signals between different logic devices.

The 74AHCT1G126W5-7 is designed for high-speed opto-electronic isolation applications. The Push-Pull Buffers provides very fast outputs that are unambiguous and are free from overshoot and undershoot. It has excellent protection against electromagnetic interference radiation.

The 74AHCT1G126W5-7 is also suitable for high-temperature and automotive applications. It is also suitable for applications that require high speed and low power consumption. The device can tolerate a wide range of operating temperatures, from -40 °C to 85 °C, and can handle a voltage range from 1.65V to 7V.

In summary, the 74AHCT1G126W5-7 is a high-speed single to one buffer designed for FPGA and ASIC applications. It is also suitable for opto-electronic Isolation, high temperature, and automotive applications. It is built with Push-Pull Buffer and Comparator topologies and has excellent protection against EMI radiation. It is also built with Schmitt-trigger inputs to reject noise, and the wide voltage range of 1.65V to 5.5V makes it suitable for different application fields.

The specific data is subject to PDF, and the above content is for reference