74AHCT244APWJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AHCT244APWJ is an octal buffer and line driver consisting of eight non-inverting buffers and is designed for 1.65 to 5.5V VCC operation. Its inputs accept standard TTL levels and its outputs can sink or source up to 24mA. This IC is capable of driving up to 20 transmission lines, each containing three series connected LEDs, plus a 5KΩ current limiting resistor. This IC is commonly used within logic-level logic-level applications, such as logic-level logic converters, logic encoders, logic expanders, logic multiplexers and logic buffers.

The 74AHCT244APWJ acts as a buffer between a digital input, such as TTL levels and an output due to its buffering capability. It takes the TTL levels, translates it into a voltage that is suitable for driving the transistor which then drives the load, such as LEDs.

The 74AHCT244APWJ consists of eight non-inverting buffers. Each buffer has an input and an output terminal and each buffer is connected in series. A single buffer is capable of driving a load of up to 20 transmission lines, each containing three series connected LEDs, provided that a 5KΩ current limiting resistor is used.

The output of each buffer is controlled by the input, whereby a high input level will result in a high output level and a low input level will result in a low output level. The output stages of each buffer are capable of sinking or sourcing up to 24mA, so as to drive the current-carrying devices such as LEDs.

The 74AHCT244APWJ also has the capability to translate digital levels, such as TTL, into higher voltage levels. This is done by use of an internal step-up amplifier, which is connected to each of the buffer\'s output stages.

The 74AHCT244APWJ can also be used in applications such as logic level logic converters, logic encoders, logic expanders, logic multiplexers and logic buffers. It provides a highly reliable and robust solution for these applications, with its inputs accepting standard TTL levels and its outputs capable of sinking or sourcing up to 24mA.

In conclusion, the 74AHCT244APWJ is a very versatile and capable octal buffer and line driver consisting of eight non-inverting buffers. It is designed for operation at voltages ranging from 1.65 to 5.5V, and has a wide range of applications such as logic level logic converters, logic encoders, logic expanders, logic multiplexers and logic buffers. It can also translate digital levels, such as TTL, into higher voltage levels, as well as drive loads of up to 20 transmission lines, each containing three series connected LEDs, provided that a 5KΩ current limiting resistor is used.

The specific data is subject to PDF, and the above content is for reference