74AHCT2G125DP,125

Series:	74AHCT
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Buffer, Non-Inverting
Number of Elements:	2
Number of Bits per Element:	1
Input Type:	--
Output Type:	3-State
Current - Output High, Low:	8mA, 8mA
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package:	8-TSSOP
Base Part Number:	74AHCT2G125

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Buffers, Drivers, Receivers, Transceivers: 74AHCT2G125DP,125 application field and working principle

The 74AHCT2G125DP,125 chip is a high-speed logic interface from the TTL family. It is a logic buffer, driver, receiver, and transceiver, used in a wide range of professional and consumer applications where high speed and low power are a priority. This chip is most commonly used to invert and buffer a signal, allowing it to be sent to a different circuit or device with the original signal being maintained. It is also used to convert a digital signal into an analog signal and vice versa.

Buffers are logic devices used to isolate and amplify digital signals; they separate any slow or digital noise from the original signal. In this way, they are devices that drive and receive digital data, increasing or maintaining the data rate while passing it on to another device or computer. Drivers are logic devices that control devices such as displays and motors. The 74AHCT2G125DP,125 can be used to drive either TTL or CMOS devices with sufficient current for the device to operate.

Receivers are logic devices that process an incoming signal and convert it into an output signal. The 74AHCT2G125DP,125 can be used as a logic receiver, capable of receiving and recognizing a logic signal from the outside without requiring additional additional supporting components or logic. Transceivers are logic devices that both transmit and receive digital signals; they are used mainly in telecommunication and signal processing systems.

The 74AHCT2G125DP,125 has two primary application fields: first, it is used to transceive a digital input signal and convert it into an analog signal; and second, it is used to transceive an analog signal and convert it into a digital signal for use in logic processing. This chip is suitable for both high-speed and low-power operations, making it an ideal choice for a wide range of applications.

The 74AHCT2G125DP,125 is also commonly used in digital logic test and programmable logic devices (PLDs). PLDs use these chips to receive input signals from outside sources and convert them into an understandable digital format for the device. The PLD then reads the input signal and executes the corresponding instructions.

The working principle of the 74AHCT2G125DP,125 is fairly straightforward: it receives an input signal in either digital or analog form and converts it into an output signal in the opposite form. This allows the chip to convert data into a signal suitable for either an analog or digital device. In the case of analog signals, the data is converted into a digital signal via pulse-width modulation; with digital signals, the data is converted by a logic circuit. This chip also supports logic levels up to TTL or LVTTL levels, meaning that it can operate with a wide variety of digital signals.

In summary, the 74AHCT2G125DP,125 is a high-speed logic interface from the TTL family, capable of being used as a buffer, driver, receiver, and transceiver. It is used mainly for transceiving digital and analog signals, allowing signals to be sent to another circuit or device with the original signal being maintained. This chip is suitable for both high-speed and low-power operations, making it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description