74AVC16245DGG,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AVC16245DGG,112 is an advanced 16-bit, low-skew, low-capacitance, 3.3‮V logic buffer/driver/receiver. It has a 1-byte input and 4-byte output and is designed for signal integrity and signal switching applications demanding controlled capacitance, providing optimal electrical performance and signal integrity.

This device is categorized as a Logic - Buffers, Drivers, Receivers & Transceivers device. Buffers are used to isolate one signal from another and safeguard sensitive circuits from overvoltage conditions, high-load current draw, and high frequency noise caused by switching currents. Drivers use two transistors or an inverter stage to drive higher current loads through an output, such as logic this device can drive four outputs with a 1-byte input. Receivers are the reverse of drivers, converting logic signals from the output device into signals the logic device can use. Finally, transceivers are devices that can both transmit and receive signals, acting as both a driver and a receiver.

The 74AVC16245DGG,112 is efficiently used in high-speed data rate applications, such as Ethernet, networking and POE applications. Its low output capacitance helps maintain signal integrity, making it ideal for high speed systems where timing and impedance requirements are critical.

The 74AVC16245DGG,112 enables better signal integrity because it operates in a low input capacitance mode, allowing higher data rates and higher reliability at higher clock rates. This advantage is due to its lower input capacitance, which ensures digital signals are transmitted accurately and reliably at higher clock rates.

The 74AVC16245DGG,112 also offers improved signal quality for long wire runs and multi-drop bus systems. The low capacitance outputs (12pF typical) enable the device to operate at higher levels and maintain signal integrity even with longer data transmission paths.

The 74AVC16245DGG,112 operates from a single 3.3‮V supply, and can tolerate a wide range of supply voltages from 1.8‮V to 3.3‮V, making it ideal for mixed-voltage systems. The inputs are tolerant to the 5.0V of standard logic families. It also features hot-plugging and ESD protection.

The 74AVC16245DGG,112 operates at speeds up to 900‮MHz, allowing it to support data rates up to 6‮Gbps. The typical rise and fall time is 15‮ns, making it useful in high-speed digital systems. Its powerful transconductance amplifier design provides dual inputs to the output stage, allowing digital signals to be transmitted without the necessity of adding complex logic circuitry.

The 74AVC16245DGG,112 is also ideal for telecom systems and other high-speed applications. Its low input capacitance, 18‮pF typical, reduces the capacitive loading and maintains signal integrity even at higher data rates. With its low power consumption, it is ideal for power sensitive applications.

Overall, the 74AVC16245DGG,112 provides an excellent solution for high-speed signal switching in logic and network applications. Its low capacitance outputs and low power consumption make it ideal for a wide range of applications, from logic switching to telecommunications.

The specific data is subject to PDF, and the above content is for reference