74CB3T16212DGGRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Signal Switches, Multiplexers, Decoders are essential components in numerous electronic circuits used around the world in a range of different applications. 74CB3T16212DGGRG4 is one such component, and it is used specifically in numerous logic circuits. This article will discuss the specific application field and working principle of 74CB3T16212DGGRG4 in detail.

74CB3T16212DGGRG4 is a type of two-to-four line decoder/demultiplexer. This particular type of decoder/demultiplexer is designed to accept two active-low logic inputs, and to process them into one of four distinct active-low logic outputs. It features a latch-logic structure which results in a shorter propagation delay compared with conventional decoders. Furthermore it also has full bus decoding which provides for fully decoded output, even when the inputs are completely different.

The 74CB3T16212DGGRG4 decoder/demultiplexer is used in many applications. It is particularly useful in devices where the output is controlled by two or three input lines. It can be used for example in multi-channeling or parallel-to-serial conversion, and also for address decoding in memory elements or microprocessors. It can also be employed in multiplexers and encoders, again due to its ability to output a decoded signal when two or three inputs are present.

The 74CB3T16212DGGRG4 decoder/demultiplexer is usually implemented in complementary metal oxide/semiconductor (CMOS) technology, allowing for high speed and low power operation. The decoder/demultiplexer features two active-low enable-inputs and four active-low output lines, and the two enable-inputs determine which of the four available outputs are active. When both enable-inputs are LOW, all four outputs are LOW. When only one of the enable-inputs is LOW, only one of the four outputs will be LOW, and this depends on the logic combination of the signals at the two enable-inputs. When both enable-inputs are HIGH, none of the four outputs are LOW.

The working principle of the 74CB3T16212DGGRG4 decoder/demultiplexer is as follows. The two enable-inputs determine the active output line, and determine which of the four available outputs are LOW when one or both of the enable-inputs are held LOW. When both enable-inputs are HIGH, none of the four output-lines is LOW. This principle is equally applicable when one or two of the enable-inputs is HIGH.

74CB3T16212DGGRG4 is an immensely useful decoder/demultiplexer and is used in many electronic circuits around the world. It is particularly useful for multi-channeling and parallel-to-serial conversions, as well as for address decoding and multiplexing. Additionally, it is often implemented in CMOS technology, as it allows for high speed and low power operation. This article has discussed the application field and working principle of 74CB3T16212DGGRG4 in detail.

The specific data is subject to PDF, and the above content is for reference