74F545SC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-Buffers, Drivers, Receivers, Transceivers are the building blocks of most digital systems. They perform the conversion of digital signals into higher speed or larger current applications or different voltage levels. The 74F5XX family is an example of such integrated circuit chips. The 74F545SC Quad Bidirectional Bus Transceiver is a product in this family whose application field and working principle shall be discussed in this article.

The 74F545SC is a "quad bi-directional bus transceiver" which operates with a single +5V supply. It is intended for use in applications where data and address bus have "tristate" requirements. The tristate isolation between devices allows data inputs from the bus to be separated from data outputs. The 74F545SC\'s four channels are controlled by three pins, namely, Output-Enable (OE), AO (Address Output) and DO (Data Output). The OE pin is used to enable or disable the 74F545SC. When enabled, I/O line will drive the bus as either an input or an output. Different configurations are possible by changing the state of the data or the address pins.

The 74F545SC chip is mainly used in data communication such as microcomputer-based systems. By providing data isolation and transform, it allows microcomputers to communicate with other elements on their bus. Through its four channels of I/O, it can also be used for various types of digital logic applications such as digital logic circuits, amplifiers, and multiplexers.

The working principle of the 74F545SC revolves around its transceiving capabilities. The device can be set up as either an input (data from the bus to the device), or an output device (data from the device to the bus). When in output mode, data is applied to the AO and DO pins and the pin OE is pulled high. When in input mode, the OE is pulled low and the AO and DO pins are open-circuited. Both AO and DO pins can be switched at will to either an input or an output depending on the requirements of the application.

The transceiving principle of the 74F545SC is based on the totem pole output stage. The totem pole output stage is composed of two series-connected transistors connected between the ground and the output pin. Depending on the logic level at the input, one of the transistors will conduct and the other will be cut-off. The result here is that the output pin is pulled up or down according to the logic level at the input. This feature allows the device to function as either an input or an output in an efficient manner.

In summary, the 74F545SC chip is a quad bidirectional bus transceiver. It is mainly used in data communication where data and address bus have tristate requirements. Its working principle is based on the totem pole output stage which allows it to function as either an input or an output device. The device is widely used in various types of digital logic applications for their data isolation and transfer features.

The specific data is subject to PDF, and the above content is for reference