74FCT162373ATPVG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74FCT162373ATPVG is a single-bit high-speed, low-power, octal non-inverted D-type latch from the fast CMOS FCT series. It features latch-enable (LE) and output-enable (OE) control inputs. This device is designed for use in general-purpose flip-flop applications, where clock-to-output times of less than 10ns, low power dissipation of 4.4mA, and very low noise margin are required.

The latch belongs to logic latch family. A latch is an electronic component that can store a binary value and retain it until it is reset or flipped. Latches are transistors or switches, and they can be made from them. A latch can either be powered on or off, whether it’s a physical switch or an electrical effect. Latches are often used in digital logic, in which the latch\'s output must remain unchanged until the latch is triggered by some input. Depending upon the type of application, latches can be of two varieties: level-sensitive and edge-sensitive.

The 74FCT162373ATPVG is an edge-triggered latch. Its LE signal changes at the positive edge of the input clock pulse, when the signal changes from low to high. This transition triggers the write of data into the device, which is stored until the OE control input is used to enable or disable the outputs. The device offers high-speed operation and is well suited for use in high-speed synchronous applications. The device features very low input and output capacitance, allowing greater speed performance at the same power level. The device also consumes very low power and provides noise immunity with a very low noise margin.

The 74FCT162373ATPVG offers a wide range of applications, including bus management logic, address latches, programmable logic arrays (PLAs), and components for logic translation. The device is used in digital circuits which require fast response time and low noise levels when handling data signals. The latch can also be used to store data in memories and create signals which can be used as system clocks. It is also widely used in registers/memory for commercial/industrial applications.

In summary, the 74FCT162373ATPVG logic latch is a single-bit, high-speed, low-power, octal non-inverted D-type latch with edge-triggered inputs. It is suitable for use with the most demanding applications, including those requiring fast clock-to-output times, low power dissipation, and very low noise margins. The device is widely used in address latches, registers/memory, PLAs, and translation logic, as well as in applications requiring fast response time and low noise levels.

The specific data is subject to PDF, and the above content is for reference