SN74LV373ATDBG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-Latches are devices that can store a logic level at the input. The SN74LV373ATDBG4 is a 3-to-8 bit latch from Texas Instruments. It is a low voltage, low power device offering high performance and integrated features. The device is designed for low voltage applications, such as those running on a 3.3V or 2.5V power supply.

The SN74LV373ATDBG4 is an 8-bit latch with two main applications, storage and flow control.

Application Field

In storage applications, the input of the latch is used to store logic levels. This can be useful in situations where the signal needs to be sent from one part of a circuit to another without having to go through the processing function again. For example, the SN74LV373ATDBG4 can be used to store the last eight bits of a data signal, say from a shift register, making it much faster to get the data out of the system.

In flow control applications, the SN74LV373ATDBG4 can be used to provide a signal when data is held within the latch. By reading the latch input, the disabling of a register or a section of logic can be controlled.

Working Principle

The SN74LV373ATDBG4 latch is provided with two main control pins, R and E (or Reset and Enable). The R pin is active low, which means that it is active when the voltage applied to it is 0V or 0 logic. The Enable pin, or E, is active high, which means that it is active when the voltage applied to it is 3.3V or 1 logic. When both the R and E pins are active, the latch is enabled and the input of the latch is stored in the output.

The SN74LV373ATDBG4 has an asynchronous R pin, which can be used to reset all the outputs to 0 logic when the R pin is active. This can be used to quickly clear the outputs without having to go through the full enable cycle.

The SN74LV373ATDBG4 also has an asynchronous E pin, which can be used to enable the latch without having to wait for both the R and E pins to become active at the same time. This can reduce the latency between inputs and outputs significantly.

In addition, the SN74LV373ATDBG4 has two modes of operation, Weakly Interlocked (WI) and Strongly Interlocked (SI). The SI mode requires that both the R and E pins must be active before the output is enabled, while in the WI mode the output is enabled when either the R or E pin is active.

The SN74LV373ATDBG4 is a versatile and powerful latch in logic applications. Its combination of low voltage, low power, high performance and integrated features makes it an ideal choice for use in logic applications.

The specific data is subject to PDF, and the above content is for reference