74FCT3807SNDGI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74FCT3807SNDGI is a clock/timing chip used in applications including buffering, driving, and timing. It is a medium-speed, low-voltage FCT family circuit designed to drive and/or potentially directly transmit medium-speed clocks into high fan-out and/or high-speed applications. It has an non-inverting output buffer that can be used for buffering an oscillator directly or a clock buffer

The 74FCT3807SNDGI has a wide operating range of 1.65V to 5.5V, and features a high speed logic family that is capable of driving up to 24 outputs at 400 Mbps. The chip has an input pair that allows it to be used in applications that use both synchronous and asynchronous clocking. The dual-input pair allows the chip to operate in the following applications: stand-alone buffer, clock buffer with OE buffering, and clock buffer with asynchronous driving.

The 74FCT3807SNDGI uses active source synchronous (ASS) logic for its input/output performance. This means that the input and output signals are synchronized by an active source. When the ASS logic is enabled, it will begin to continuously buffer the input signals, which enables the chip to drive and/or transmit clocks into high fan-out and/or higher speed applications. Additionally, ASS logic allows for the chip to operate with a wide range of input signals and clock frequencies.

In order to operate efficiently, the 74FCT3807SNDGI requires an external clock signal, which is typically provided by an on-chip oscillator. This oscillator sources the clock signal to the chip, which it then buffers and/or transfers to the output pin. The external clock signal should have a frequency that is dependent on the application. Depending on the application, the chip may be used to drive a high-fan-out and/or high-speed clock signal.

The 74FCT3807SNDGI also contains an internal output disable function that is enabled by an active low input. When the output disable function is enabled, the chip will stop driving output and the attached load will be disconnected from the chip. This is typically used when the device is not being used, or when the input voltage is not within the specified range.

In addition to being used as a clock buffer, the 74FCT3807SNDGI can also be used as a driver for digital signals. When the chip is used in this application, the digital input signals will be buffered and transmitted to the output pins. This allows for the digital signals to be properly driven, which helps ensure that the signals are properly received by the destination device.

The 74FCT3807SNDGI is a versatile and efficient clock/timing chip used in a wide variety of buffering, driving, and timing applications. It is capable of buffering, driving, and transmitting medium-speed clocks into high fan-out and/or high-speed applications. Additionally, the chip contains an output disable function, which allows it to be used as a digital driver as well. The chip can also be used to drive high-fan-out and/or high-speed clock signals when the external clock signal has a frequency that is specified for the application.

The specific data is subject to PDF, and the above content is for reference