PI6C49S1510ZDIEX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Clock/Timing ICs are a critical part of numerous electronic systems, ensuring performance, stability, and dependability. Here, we’ll discuss the PI6C49S1510ZDIEX, a clock buffer and driver IC, and its applications and working principle.

PI6C49S1510ZDIEX Overview

The PI6C49S1510ZDIEX is a 1.5GHz clock buffer and driver IC for clock applications in laptops, desktops, servers, and other electronics. It features a wide operating range from 1.2V to 3.3V, low power consumption of 2.5 mW, and robust ESD protections up to 2 kV. It can drive up to 15 outputs, which can reduce cost and power consumption. The output frequency is adjustable, and it is available with or without built-in slew rate control.

Applications of the PI6C49S1510ZDIEX

The PI6C49S1510ZDIEX is designed for use in electricity substations and high-speed clocking applications where low power consumption, reliability, and performance are required. It is ideal for clocking systems where power consumption, clock jitter, noise, and ESD immunity are essential. The PI6C49S1510ZDIEX is also frequently used in system-on-chip designs and multi-processor systems to enable stable clock distribution in the most challenging environments. Additionally, this clock buffer and driver could be used for networking and telecommunications applications, such as base station clocking, networking, and DSL systems. Other potential applications include storage, flash memory, and military/aerospace applications.

Working Principle

The PI6C49S1510ZDIEX works by buffering an input clock and distributing it to multiple outputs. The input clock can be in the range of 1.2 V to 3.3 V, and the output buffers can be adjusted between 1.2 V to 3.3 V. It is designed to reduce noise, power consumption, and jitter, and is capable of driving up to 15 outputs. The output frequency is adjustable, and its superior ESD protection allows for it to operate in hostile environments where ordinary clock buffers and drivers would fail.

The PI6C49S1510ZDIEX features advanced differential receiver design that helps improve ESD immunity, reduce current draw and minimize customer-side component count. Additionally, the “Fail-Safe” design helps provide good dielectric protection, allowing the PI6C49S1510ZDIEX to even operate successfully in high RF environments with impedance mismatches between output and ground. Its advanced EM Immunity helps protect the clock device from external interference.

The PI6C49S1510ZDIEX also has a slew rate control feature which can reduce output jitter and minimize EMI radiations. The slew rate control can continuously adjust the output slew rate on a wide range between 0.45V/ns and 0.85V/ns and ensure that the output stays in the correct switching state.

Conclusion

The PI6C49S1510ZDIEX is a clock buffer and driver IC with a wide application range. It features an adjustable output frequency, low power consumption, robust ESD protection, and advanced design features that help reduce noise, jitter, and power consumption. It can also be used in hostile environments and is ideal for clocking systems with EMI immunity. All of these features make it an ideal choice for electricity substations and high-speed clocking applications where reliability and performance are paramount.

The specific data is subject to PDF, and the above content is for reference