74FCT3807SOG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74FCT3807SOG is a low-skew, high-frequency multiplexer. Its main purpose is to have the capability to route high speed signals and expanding timing capability, providing a low-skew signal from output to output.

The 74FCT3807SOG is a clock/timing device and works as a level shifter, buffer, and driver for clock/timing. It has two input terminals, two select terminals, and eight output terminals. The two inputs receive a single clock signal and can source them to eight outputs. A select control signal determines which output will be active and which output will be disabled. The 74FCT3807SOG is capable of working at speeds up to 200MHz. The output swing is adjustable, allowing the user to adjust the input/output ratios.

The most prominent application of the 74FCT3807SOG is in high-speed communication systems. It is used to route clock signals around a board at high speed, reducing the risk of signal degradation. It also reduces the need for multiple output buffers to buffer each output signal. In addition, it can be used to expand the timing capabilities of a communication system. It allows multiple signals to be simultaneously transmitted on different channels with a low-skew signal from each output.

The underlying working principle of the 74FCT3807SOG is similar to other clock/timing devices. It uses an input oscillator, two select terminals, two input terminals, and eight output terminals. The two select terminals control which output will be active. The output voltage is adjustable depending on how the select terminals are set. The oscillator is then used to source the clock signal to the outputs. The output terminals will then have a low-skew signal that is proportional to the clock signal.

In summary, the 74FCT3807SOG is a low-skew, high-frequency multiplexer. It is mainly used in high-speed communication systems for routing clock signals and for expanding timing capabilities. It uses an oscillator to source clock signals to the two inputs and eight outputs. The select terminals determine which output will be active. The output voltage is adjustable dependent on the select settings. It is capable of working at speeds up to 200MHz.

The specific data is subject to PDF, and the above content is for reference