74FCT573ATSOG8

Series:	74FCT
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	D-Type Transparent Latch
Circuit:	8:8
Output Type:	Tri-State
Voltage - Supply:	4.75 V ~ 5.25 V
Independent Circuits:	1
Delay Time - Propagation:	2ns
Current - Output High, Low:	15mA, 48mA
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	20-SOIC
Base Part Number:	74FCT573

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Latches

The 74FCT573ATSOG8 is an 8-bit 3-state latch designed for digital systems for use with low-voltage (∼3V–5.5V) TTL or CMOS logic devices. It combines a transparent latch and 3-state output buffers in a single device, with an active-Low enable (WE) and active-High reset inputs. The flip-flop is reset to the “0” state, and is clocked on the rising edge of CLK, while the transparent latch will be updated on the falling edge of CLK.In a 3-state latch, input data on the data lines (D₀–D₇) can either be latched with the enable signal (WE) or output in the 3-state condition. Thus, the 3-state buffers provide a type of multiplexing function, allowing the user to either provide data from the latch or from a data line.The 74FCT573ATSOG8 features a transmission gate design, allowing greater drive capability than a resistor-transistor logic (RTL) device of equivalent size. This allows the device to implement multiplexers and decoders that are more efficient than comparable devices available.In addition, the device has a low propagation delay and low output-enable time. This means that a signal that is input to the device is output faster, helping to reduce the amount of time it takes for signal operations to be completed.The 74FCT573ATSOG8 also features CMOS logic inputs, allowing the device to be used with a wide range of logic standards. This means that the device is compatible with logic standards from a variety of manufacturers, reducing the need for special logic circuit designs for different manufacturers.Overall, the 74FCT573ATSOG8 is a versatile 3-state latch designed for use with digital systems. Its transmission gate design and CMOS logic inputs allow it to be used with a wide range of logic standards, and its low propagation delay and output-enable times provide for faster signal operations. As such, the 74FCT573ATSOG8 is ideal for use in designs where multiplexing or data-selection operations are required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description