74HC4020BQ-Q100X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74HC4020BQ-Q100X is a 14-pin bipolar CMOS logic device. It can be classified as a logic counter, divider, as well as a frequency divider. It features built-in protection against excessive current between the outputs and other pins, short circuit protection between the power supply and supply line, and protection of outputs from external ESD (electrostatic discharge).

The 74HC4020BQ-Q100X is widely used in many applications due to its features that give it a wide range of functionality. It is typically used for dividing clock signals to reduce the frequency, thereby controlling the speed and duty cycle of a system. It is also used for addressing memories, like RAM, ROM and PROM, encoding, decoding and pulse width modulation applications.

The working principle of the 74HC4020BQ-Q100X is based on the Johnson counter configuration. It is a type of digital counter where each bit of the output is determined by the state of the bit in the previous stage. This counter is formed by cascading a Flip-Flop with a binary counter. It starts with a clock input which is applied to the first Flip-Flop. Subsequent inputs of the clock are then applied to the second Flip-Flop and so on. The outputs of the Flip-Flops drive the inputs of the binary counters.

The 74HC4020BQ-Q100X has four outputs, labeled Q0 to Q3, each comprising of four bits. The outputs are activated based in the count of the inputs. The first output (Q0) is activated at the count of zero, the second output (Q1) is activated at the count of four, third (Q2) is activated at the count of eight and the fourth output (Q3) is activated at the count of twelve. Each output is held until the count is incremented by one so that the output is latched at the target count.

The 74HC4020BQ-Q100X can be set in reset by applying a low voltage to the reset line. It is also equipped with an enable line that can be used to activate or deactivate the counter. This counter can also be used for frequency division, with the Q3 output divided from the Q0 output frequency by sixteen. It can also be used to divide an input frequency by n (where n is the total number of clocked outputs).

In summary, the 74HC4020BQ-Q100X is a very versatile, high-speed logic device. It is typically used for clock signal division and applications such as addressing memories, encoding, decoding and pulse width modulation. It has four outputs that can be used for frequency division and reset function. It is a very dependable logic counter and divider.

The specific data is subject to PDF, and the above content is for reference