74HC75D,652

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-Latches, namely Flip-Flops, are sequential logic circuits that are used to store one bit of information. They are a basic function of digital logic and are used in a variety of electronic equipment, including computers, communication systems, and consumer electronics. Latches, particularly the 74HC75D,652, are designed to hold or store a bit or multiple bits of data as long as associated power supply voltage is present.

The 74HC75D,652 device is a registered circuit that is designed to store one piece of information, usually binary data such as 1s and 0s. It is made up of a gated input latch, a data flip-flop, and a gated output register. The device has two individual logic level latches: a data latch and an output latch. The 74HC75D,652 also has two separate output enable pins, one for the data latch, and one for the output latch. Both these latches can be set or reset either synchronously or asynchronously. This combination of latch and flip-flop makes the 74HC75D,652 versatile enough to be used in a wide range of applications.

The 74HC75D,652 is commonly used in applications where data must be stored securely and quickly. These applications can range from high-speed memory configurations, to low-speed data acquisition and processing, to switching sampling and even alarm systems. In particular, the 74HC75D is widely used for data-rate processing and data transfer. It is also used for the control of large-scale mechanical systems, and is a common choice for high-speed data buffering, often for high-speed laser and optical systems. The 74HC75D,652 can also be used in applications involving clocked logic systems, analog designs, and general purpose logic, such as digital logic systems.

The 74HC75D,652 is a type of flip-flop circuit, or an electronic circuit made up of a combination of logic gates and registers. It is often referred to as a “sequential element”, which means that its output depends on not only the current state of the inputs, but also on the past inputs and the order in which they were applied. In other words, the state of the flip-flop circuit is “clocked”, or forced only when a clock signal (such as a square wave) is applied. The clock speed of the flip-flop is determined by the frequency of the clock signal, and the speed of this signal is determined by the clock input.

The 74HC75D,652 typically operates from a voltage range of 2 V to 6 V, which gives it a wide range of applications. The 74HC75D,652 has a propagation delay of 8 ns typical and 13 ns maximum, which means that it is ideal for high-speed applications. Aside from the data and output latches, the device also contains three control pins for operating conditions, a control pin for resetting the data latch, and two enable pins for setting the output latch. These control pins are designed to help the user control the operation of the flip-flop.

In conclusion, the 74HC75D,652 is a versatile flip-flop type circuit designed to store one piece of information. It can be used in a variety of applications, such as high-speed memory configurations, low-speed data acquisition and processing, switching sampling, and clocked logic systems, among others. Its wide operating voltage range and propagation delay make it particularly suited to high-speed applications, and its ability to be set or reset synchronously or asynchronously makes it a great choice for designers.

The specific data is subject to PDF, and the above content is for reference