74HCT157DB,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Multiplexers, Decoders and Logic-Signal Switches are all terms used to describe types of integrated circuits that provide functions involving logic conduction, signal switching and coding conversion. One such chip is the 74HCT157DB,112. This digital logic integrated circuit has a wide range of applications and a versatile operation that makes it suitable for use in a variety of electronic devices.

The 74HCT157DB,112 is a digital logic, quad 2-to-1 multiplexer. It contains four independent 2-to-1 multiplexers, each featuring two data inputs, one select input, and one output. Each 2-to-1 multiplexer has two alternative sources of data at inputs A and B, which are selected by the select input, depending on its logic value. The output is high if input A is selected, and low if input B is selected. It also has two active low-to-high enable inputs. When the enable inputs are both low, all four multiplexers are inactive, with all outputs being low. When either or both of the enable inputs are high, the outputs are the same as their respective select inputs.

The 72HCT157DB,112 can be used in a variety of applications, both in digital and analog electronics. In digital electronics, it can be used to select either one data signal line from two different sources, or to connect two data signal lines at once. It can also be used to control multiple outputs with a single set of inputs. The 72HCT157DB,112 is capable of being used as a signal multiplexer, allowing selection and transmission of analog or digital signal sources. It can also be used as a decoder, providing on-off control to four different outputs. In analog applications, the chip can be used as a active filter, where its multiplexers can be used to route signals from multiple sources to a single destination.

The working principle of the 74HCT157DB,112 is relatively straightforward. First, the select input is set to either the low (A) or high (B) position. Next, the enable inputs are enabled, enabling the multiplexers to function. The data is then collected from either A or B and output to the multiplexer’s corresponding output. This is based on the logic value of the select input. If the select input is low, the data from A is output to the output. If the select input is high, the data from B is output to the output. If the enable input is not enabled, the multiplexers will be inactive, and the output will be low.

Overall, 74HCT157DB,112 is a versatile integrated circuit with a wide range of applications. It can be used as a multiplexer, decoder, or active filter, providing on-off control to four different outputs. It can also be used to switch digital and analog signals, as well as to control multiple outputs with a single set of inputs. Its straightforward working principle makes it easy to integrate into a variety of digital and analog devices.

The specific data is subject to PDF, and the above content is for reference