74HCT238D-Q100J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74HC238D-Q100J is a member of the high-speed CMOS logic family and is an 18-bit 3-to-8 line decoder/demultiplexe with active LOW outputs. It is a versatile logic function which can be used as address decoders, data selectors, encoders, multiplexers and any logic application that requires decoding or de-multiplexing from three input lines. It has active LOW outputs, the output enable function and the latch function.

The 74HC238D-Q100J\'s application field is widely used for input data selection, address generation, selection of control signals and decoding of local resistance. It can be used to select the output signal according to the input signal and the chip select signal. In addition, it can convert the binary signal of the three-input control line into the corresponding output signal of the eight-input logic signal. The 74HC238D-Q100J can be used in the input or output section of the logic level conversion circuit, which is usually used to convert the data bus of the CMOS logic system to the TTL logic system.

The advantages of the 74HC238D-Q100J are that it embeds Schottky components with low leakage current and fast switching speed, and the 74HC238D-Q100J can be operated at temperatures ranging from -55°C to 125°C. It also has a very low sink current of 6mA, which can provide sufficient speed to digital systems.

The working principle of 74HC238D-Q100J is that it uses the three-input logic signal (A 0 , A 1 , A 2 ) and the chip select signal (CS) of the three-input control (3X1) line to generate the correspondingly related (8X1) output signal. The working principle is that when CS is low, the three inputs A 0 , A 1 , A 2 determine the output, while when CS is high, the outputs are all high impedance, this chip select input controls the output.

That is, if CS is low, all A 0 , A 1 , A 2 input signals are low, and the output is low; if CS is low, A 0 A 1 , A 2 input signals are not all low at the same time, the output will be low; if CS is high, all outputs are high impedance. The chip also has an active LOW enable pin, output enables (OE) which is used to disable all the outputs, the output enable function is enabled when the OE input is low and disabled when it is high. As long as OE is low, the outputs can switch states according to the input signals.

The latch enable (LE) input is used to enable the latch function, when LE is high, the output is latched, when LE is low, the output is not latched, when LE is high, the logic inputs can be disabled. The logic outputs may not remain stable until LE is enabled.

Overall, the 74HC238D-Q100J is a versatile logic component which is widely used in logic applications requiring decoding, demultiplexing or other data selection control. With its active LOW outputs, output enable and latch enable functions, it proves to be an ideal device for use in digital systems for selection, conversion and other related applications.

The specific data is subject to PDF, and the above content is for reference