74HCT594D,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74HCT594D,112 Application Field and Working Principle

Logic-Shift Registers are a type of register which is capable of performing shifts, rotates and multiplexing operations on a whole register, usually on a single clock pulse. The 74HCT594D,112 is one of the most popular logic-shift registers with a wide range of applications in different fields.

The 74HCT594D,112 is a 8-bit shift register which contains an 8-bit storage register and 3-state output register. The storage register consists of 8 flip-flops that can store 8-bit of data which can be shifted through the four connected output lines of the device. The 3-state output register is made up of 3 transistors which allow the output pins to be configured to either a high, low or high impedance state.

The 74HCT594D,112 is primarily used to convert serial data into parallel data by shifting over the stored data in the shift register on the rising edge of a clock signal. This operation is known as serial-to-parallel conversion. The device can also be used for multiplexing, where stored data can be sent to a single output line and the data is shifted in a certain pattern.

Apart from the use of the device mentioned above, it is also commonly used in memory clocks, memory address incrementers and universal communication interfaces such as the Universal Asynchronous Receiver Transmitter (UART). A UART is a computer hardware device which converts data from a parallel to serial form and vice versa.

The working principle of 74HCT594D,112 is rather straightforward. Upon the rising edge of a clock signal, the data stored in the shift register is shifted to the next stage in the register and to the output pins of the device. The output pins (QA - QH) will take on the values of the stored data in the flip-flops. By applying a clock signal on the shift register, new data can be shifted into the register with the old data being pushed out of the register. A separate reset signal on the reset pin is required to reset the register before the start of operation.

The 74HCT594D,112 is thus a very versatile and powerful logic device which is widely employed in many applications. With its ability to store multiple bits and perform serial-to-parallel and multiplexing operations, it is an invaluable tool for any electronics engineer. It is also relatively easy to use, which makes it all the more popular.

The specific data is subject to PDF, and the above content is for reference