74HC590N,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74HC590N is part of the logic family of counters, dividers and ripple counters. The 74HC590N is a 8-bit binary ripple counter. Built on the positive edge-triggered D-type flip-flop architecture, the 74HC590N is composed of a series of flip-flops with each one being triggered by the output of its predecessor. Each flip-flop providing a stage for a single bit in the binary count. Generally, the 74HC590N is clocked on either the rising or the falling edge of the incoming clock signal. The 74HC590N has a synchronous clear input pin, allowing for resetting the output to the initial value of 0.

The application field for the 74HC590N is wide. As one of the more common families of logic counter chips, the 74HC590N is commonly used for managing process signals, in digital counters and in a variety of circuit designs. It can be used as a frequency divider by created a circut in which an input frequency is divided by multiples of 2 or its multiples with each stage of the ripple counter handling one binary bitstage. This type of divider circuit can be used in a variety of applications, such as computer buses and clock-driven circuits.

The subtractive counter application of the 74HC590N is also important. This type of application takes two separate binary numbers, the count value and the set value, in order to subtract the set value from the count and determine the difference. This type of application can be used in digital logic applications such as hardware rates, where one digital counter counts the rate and a subtractive counter counts the number of times the rate occurs.

In terms of output connection, the 74HC590N supports either open-drain outputs or multiplexed outputs. Open-drain outputs have the advantage of working with a wide voltage range of inputs, allowing them to be used in wide variety of applications. The multiplexed output works by combining the output stages of the counter together and sending them out as a single signal, allowing for efficient space saving when multiple components are used together.

The working principle of the 74HC590N is fairly straightforward. As previously mentioned, the 74HC590N is built on the positive edge-triggered D-type flip-flop architecture. This means that each flip-flop in the chip is triggered by the output of its predecessor. Each flip-flop provides a single binary stage of the counter. When the input clock signal is high, the binary output will be one stage higher. When the input clock signal is low, the binary output remains at the same output stage. The clear input is used to reset the output to the initial counting value of 0.

In general, the 74HC590N is a widely used, useful and efficient Ripple Counter. With its ability to be used for frequency division and subtractive counting, the 74HC590N is a widely beneficial device in the digital electronics world. It provides a simple and efficient way to manage process signals, and is extremely useful for digital counter circuit designs.

The specific data is subject to PDF, and the above content is for reference