74LCX241MSA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LCX241MSa is a medium–speed, low power logic buffer/line driver which is constructed using advanced CMOS technology. It is designed for asynchronous 2-way communications between data buses and has two selectable power supply voltage ranges, LVTTL (GTL), and LS TTL levels, thus allowing the use of either the 5V supplies available in systems using LSTTL logic, or the 3.3V supplies of those using LVTTL logic.

The 74LCX241MSa is a four–channel multiplexer/demultiplexer with two selectable power supply voltage ranges, allowing use of either the 5V supplies available in systems using LSTTL logic or the 3.3V supplies applicable in systems using LVTTL logic.

The multiplexer/demultiplexer features independent enable inputs that allow the user to selectively enable the output buffer. The outputs of the multiplexer/demultiplexer are in high impedance state when the enable is disabled. This is useful in applications where data is shared between two devices and the user can selectively enable either one of the devices.

The 74LCX241MSa is a Wide Operating Voltage Range device which has two selectable power supply voltage ranges for TTL (GTL) and LS levels. GTL is a local bus. It allows data transfers to take place between two parts of a computer. GTL is the ideal bus type for high speed transfers and high performance computing applications. LS level is an asynchronous bus with two data paths. It is used for asynchronous communications between two parts of a computer.

The 74LCX241MSa supports two output options, a high active output and a low active output. The high active output requires the device to be set up with a single pull-up resistor to the active supply voltage level. The low active output requires the device to be set up with a single pull-down resistor to the active supply voltage level. The output impedance of the device is designed to match the output impedance of a standard logic family device.

The 74LCX241MSa has two selectable power supply voltage ranges. The first is the usual 5V supply range, which is applicable in systems using LSTTL logic. The second is the 3.3V supply range, which is applicable in systems using LVTTL logic. This allows the use of the device in a variety of system designs.

The 74LCX241MSa is an asynchronous logic buffer/line driver that is suitable for use in applications where both sender and receiver devices must operate at different speed levels. The device is designed to handle data with transmission frequencies up to 10MHz. The internal circuitry is designed to reduce the bus capacitive loading, thereby allowing substantially better data rates than other buffer/line drivers.

The 74LCX241MSa offers very low propagation delays in order to accommodate fast transmission speeds. This is achieved by using a very fast edge rate and by reducing off-chip requirements to the minimum. The device is suitable for use in critical applications where a very fast switching speed is required.

The 74LCX241MSa has independent enable inputs, allowing the user to selectively enable either the output buffer or both of the two outputs. The feature is useful in applications where data is sent from a source to two destinations, and the user can selectively enable either one of the two destinations.

In addition to the multiplexer/demultiplexer features, the 74LCX241MSa has built-in input decoding. The internal decoding circuitry allows the device to detect when the Enable input is active and when the Data output is enabled. This helps in ensuring correct operation of the device.

The 74LCX241MSa is an ideal solution for applications where high speed and low power consumption are critical requirements. The device is robust and has a comparatively low power consumption level, making it suitable for use in a wide range of electronic applications.

The specific data is subject to PDF, and the above content is for reference