74LV273DB,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Most digital logic circuit systems require the device to remember or store the state or information of the system in order to produce useful outputs. Flip-flops, or sequential logic circuits, are essential for performing this type of task. The 74LV273DB,118 is an 8-bit D-type flip-flop integrated circuit (IC) consisting of eight independent positive-edge-triggered D-type flip-flops. Each flip-flop has an individual data (D) input, set (S) and reset (R) inputs and a complementary Q and Q outputs. The flip-flops are enabled simultaneously due to the common enable (E) input for all sub-circuits, and the clear (CLR) to each flip-flop is active low, pulling the corresponding output low when asserted.

The 74LV273DB,118 is suitable for controlling various types of logic circuits with various applications, such as universal shift registers, address latches, counters and other sequential logic functions. Its 2-V to 5.5-V voltage range capability (VCC) and wide operating temperature range from -40°C to 85°C makes it an ideal component for any low power, low noise and cost sensitive system.

The 74LV273DB,118 is a D-type flip-flop IC featuring eight outputs. Each of the outputs is a complementary pair of Q and ~Q signals. The Q is the output of the flip-flop, and the ~Q is the complement of Q. The S and R inputs are used to set or reset the flip-flop outputs. The inputs are active high, meaning they must be asserted high in order to activate the circuit. The E input is used to enable or disable the clock inputs of all the flip-flop circuits simultaneously. This is done by asserting the E input high or low.

The 74LV273DB,118 is a synchronous device in that the data is clocked through the flip-flop circuits in synchrony with an applied clock-pulse. The clock (CLK) input triggers the outputs Q and ~Q and causes them to change from 0 to 1, or from 1 to 0, depending on the level of the data (D) input. While the clock rises high (goes from low to high), the D input is clocked into the flip-flop and then sets the output. If the D input is low, the Q output is low, and the ~Q output is high. If the D input is high, the Q output is high, and the ~Q output is low.

The 74LV273DB,118 is an advanced device featuring low power operation, low noise and cost sensitivity. It is an ideal component for a wide range of applications, such as in universal shift registers, address latches, counters and other sequential logic functions. Its 2-V to 5.5-V voltage range and wide operating temperature range make it a reliable component for low power and low noise systems.

The specific data is subject to PDF, and the above content is for reference