74LV377D,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip Flops are an essential component of logic circuits. The 74LV377D,112 logic flip flop is a versatile device that embodies a wide range of features and functions. It is well-suited for both an industrial-grade and a commercial product design.

The 74LV377D,112 is a positive edge-triggered D-type, flip-flop with 3-state outputs. This device is organized as two “D” type flip-flops with complementary outputs and associated control logic. The flip-flops are controlled by a common, active-low clock (CLK) input, and are further controlled by two active-low set (S) and reset (R) inputs.

When the 74LV377D,112 flip flop is enabled with the active-low clock input, the two D inputs (D1 and D2) are transferred with the data present at their inputs to the respective Q outputs. When either of the active-low Set or Reset inputs is asserted, the output will be forced to its corresponding three-state condition. The Q outputs can only be enabled for the output-low (3-state) condition when both the Set and the Reset inputs are inactive (3-State).

This flip-flop has been designed to provide the lowest possible input switching thresholds while providing TTL-level output drives. The 3-state outputs are generally controlled by a pair of active-low enable (G) inputs. Logic Low on either input drives the output to a High-Impedance (3-state) condition. The logic thresholds of the enable inputs are slightly different from the logic thresholds of the data inputs, Set, and Reset inputs.

The 74LV377D,112 can be used in a variety of applications, such as frequency division circuits, counters, digital-to-analog converters and state machines. It can also be used in synchronous logic circuits, 8-bit registers, and arithmetic logic units. Furthermore, it can be used in memory systems, system control, and logic synthesis when its low-power, low-threshold characteristics make it ideal for such applications.

In addition, the 74LV377D,112 can be used in data transfer circuits and memory controllers, providing the capability for two-way data transfers in a variety of systems. It is well suited for data storage and parallel-to-serial conversions, and can be used in Pulse-Width Modulated (PWM) motor control systems.

The 74LV377D,112 flip flop can provide a fast response when switching between a steady-state and an output-low (3-state) condition. This allows multiple signals to be transferred in parallel and quickly decoded. In addition, its low-threshold requirements allow it to operate at higher frequencies and speeds than other flip flops.

The 74LV377D,112 flip flop is a reliable and cost-effective device for a variety of applications. Its low power, low threshold, and low-interconnect requirements enable for smaller device sizes and denser circuits. Also, its ability to transfer data quickly allows it to be used in high performance systems. Finally, its 3-state outputs enable for improved signal isolation, flexibility, and control.

The specific data is subject to PDF, and the above content is for reference