74LVC543ADB,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic – Buffers, Drivers, Receivers and Transceivers are the main types of components found in most digital logic circuits. They are used to either drive or receive, or with the help of integrated logic to also act as transceivers. One such component is the 74LVC543ADB,118.

A buffer is a logic device that can “buff” or “push” digital signals through the circuit, preventing occurrence of ‘ground loops’, which can arise when sensitive digital circuits encounter fluctuations in voltage levels on a chip or printed circuit board (PCB). The 74LVC543ADB,118 is a low voltage logic buffer ideal for digital circuits performing operations in a confined voltage range. It is featured in bit-slice buffer configurations, intended for use in FET devices, such as field-effect transistors (FETs), resistor-transistor logic (RTL), and transistor-transistor logic (TTL).

A driver is actually a type of buffer, but is designed to be used with field-programmable gate arrays (FPGAs). Drivers are used to interface FPGAs with data buses, allowing an FPGA to pass data from one bus to another. The 74LVC543ADB,118 driver is an ideal candidate for FPGA interface, as it is able to operate on both 6V supplies as well as 5V or 3V, making it suitable for both low voltage and higher voltage operations. It also features advanced Schmitt trigger inputs, greatly reducing propagation delay, resulting in improved data transfer between the buses. Furthermore, it is a micro-power device, with max power consumption of 4.5mA.

A receiver is a logic device used to receive data from an external source. The purpose of a receiver is to convert the received digital signal into a logic level that is compatible with the digital circuit in which it is installed. The 74LVC543ADB,118 features a differential receiver, which is used to enhance noise immunity by removing the effect of external noise and preventing the introduction of unwanted signals. The receiver provides Schmitt trigger inputs, resulting in improved accuracy and noiseless operation. It also allows operation at a low voltage, making it suitable for low-power applications.

A transceiver is a combination of a buffer, a driver and a receiver. Transceivers are designed to provide a communication interface between two digital systems. The 74LVC543ADB,118 is an advanced transceiver, which is suitable for FPGA interfaces, and offers high performance with low power consumption. Its advanced Schmitt trigger inputs reduce propagation delay, resulting in improved data transfer between the two buses. A differential receiver improves the noise immunity of the transceiver, increasing its accuracy and noiseless operation.

The 74LVC543ADB,118 is an advanced logic device, featuring low-power operation, high accuracy, and improved noise immunity. Its features make it ideal for digital circuits, providing buffering, driving, and receiving functions. Its integrated transceiver offers improved data transfer and communication between two digital systems. All of these features make it a perfect choice for digital circuits, as it offers improved performance, greater reliability and improved power management.

The specific data is subject to PDF, and the above content is for reference